Includes JE Pro Seal rings, 22mm wrist pins, and pin locks - 82.5mm bore (stock) and 9.5:1 CR
82.5mm bore (stock)
Includes JE Pro Seal rings, 22mm wrist pins, and pin locks - 82.5mm bore (stock) and 9.5:1 CR
82.5mm bore (stock)
Stock sized valve head diameter, factory triple groove keeper setup - Includes Supertech valves and IE valve seals
10X Entries Into Our F80 M3 Sweepstakes
*Existing factory triple-groove valve keepers are to be reused*
Lighter, stiffer, and supports higher revving!
Call In Or Chat For Best Price!
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-28-2026
Includes rings, wire locks, and wrist pins - 81.5mm Bore (0.50 oversize), 8.5:1 CR, 86.4mm stroke
Includes rings, wire locks, and wrist pins - 81.0mm Bore (stock), 8.5:1 CR, 86.4mm stroke
Takes 1.8L 06A engine to 2.0L (2008cc), by increasing the stroke and bore of the engine
Requires block machine work (+2mm overbore) - To be used in conjunction with IE 2.0L Stroker Crank (IESKVA6) and 144x20 connecting rods
Clearance OE spec oil.
High quality precision wound/exact tolerance performance valves and titanium retainers
Fits lower portions of the connecting rod with yellow markings
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
11-01-2026
Complete set of Ferrea high performance valve springs, and titanium retainers
24% greater load capacity and 17% more fatigue resistance
Includes rings, wrist pins, and pin locks - 83mm bore +.5mm overbore, 9.04:1 CR, 92.8mm stroke (stock) 20mm wrist pin
For vehicles with FSI engines only
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 82mm bore (1mm overbore), 9.25:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*