Precision-engineered with interchangeable adapters, this must-have kit securely grips a wide range of coil diameters to fit nearly every Euro!
10X Entries Into Our F80 M3 Sweepstakes
Precision-engineered with interchangeable adapters, this must-have kit securely grips a wide range of coil diameters to fit nearly every Euro!
10X Entries Into Our F80 M3 Sweepstakes
Perfect for a DIY strut suspension install. Comes in sturdy blow molded case.
10X Entries Into Our F80 M3 Sweepstakes
Many German suspensions hold the strut in a split housing that is clamped tightly around the strut tube with a pinch bolt. Efforts to spread the housing after removing the bolt using chisels or pry bars may result in component damage or personal injury.
10X Entries Into Our F80 M3 Sweepstakes
Remove ball joints and tie rod ends easily and safely. The right tool makes all the difference.
10X Entries Into Our F80 M3 Sweepstakes
Designed to work both as removal and installer tool for most inner tie rod ends. Adjustable range from 27mm (1-1/16") to 42mm (1-5/8") hex, round or 2 flats style tie rods.
10X Entries Into Our F80 M3 Sweepstakes
The right tool for the job makes all the difference. Remove ball joints and tie rod ends easily and safely.
10X Entries Into Our F80 M3 Sweepstakes
Used to properly tighten strut nuts. Includes the most popular European sizes.
10X Entries Into Our F80 M3 Sweepstakes
Don't get caught halfway through a project without the correct tools!
Many OEM strut nuts are 21mm and the aftermarket replacements are 22mm.
Schwaben to the rescue with a wrench with both sizes on one wrench
10X Entries Into Our F80 M3 Sweepstakes
Compress your springs, remove your struts, and reinstall dampers properly with the correct tools.
10X Entries Into Our F80 M3 Sweepstakes
Removing Pitman arms and tie rods can be tricky, especially in tight spaces - use this tool with a hand tool or impact wrench to remove them with ease.
10X Entries Into Our F80 M3 Sweepstakes
Roll around your garage on a mini toolbox with quick access to your tools and folding trays on each side to set small parts aside.
Makes quick work of aged control arm bushings.
10X Entries Into Our F80 M3 Sweepstakes
Designed for use with 65mm bushings
Sit down on your next job with our rolling seat.
10X Entries Into Our F80 M3 Sweepstakes
Properly adjust the toe on your MINI
10X Entries Into Our F80 M3 Sweepstakes
Comprehensive kit for fast and effective removal/installation of wheel bearings/suspension bushings and seals.
Measure your camber quickly and accurately
10X Entries Into Our F80 M3 Sweepstakes