ECS News

Few sensors in any car have a higher authority than the Mass Air Flow (MAF) sensor. It is so critical to fuel control that a failed or contaminated MAF can cause an assortment of driveability problems: reduced power and fuel economy, ping, a failed emissions test, and sometimes, a no-start. If your car suffers from MAF-related bog, stumble, erratic idle, stalling, or an illuminated check engine light, a new Bosch or Genuine BMW MAF can restore lost performance in minutes, and increase fuel economy.

This is the solution for users wanting to use lowering springs while extending shock life. These shocks from Koni offer you the ability to use lowering springs while keeping ride quality comfortable. Designed for lowered applications, these shocks and struts won't wear prematurely. Performance oriented shocks and struts from Koni carry a lifetime warranty! Drop that car with some Koni shocks today from ECS Tuning.

Improving performance by increasing engine work is only possible when engine temperatures are kept within a reasonable range. The Mishimoto Performance Radiator is capable of a 30% increase in cooling capacity due to a fully-brazed, two-row aluminum core that's 25% thicker than stock. The advanced radiator also uses CNC-machined quick-disconnect fittings for a perfect radiator hose attachment. Mishimoto Performance Radiator Hoses compliment the advanced radiator, resisting electro-chemical degradation and maintaining rigidity and durability when rubber hoses become soft.

If you spend time and money renewing your brake hardware and linings, you ought to consider upgrading to ECS Tuning Exact-Fit brake hoses, and do the job right. These premium brake hoses are engineered to be stronger, more durable, and better protected than the originals. They are shielded in stainless steel mesh reinforcement, and coated with bright red vinyl for added protection. Available by the axle for front or rear, or as a complete vehicle set, our DOT-compliant, tailored hoses fit like OE for hassle-free installation.

Your B7 A4 features highly individualized design elements that make successfully complementing the vehicle with aftermarket wheels a serious challenge. The Alzor Style 349 features a split-spoke design that accentuates rather than distracts from the Audi's natural steel musculature. 19" square or staggered sets of four wheels are available, finished in hyper silver or matte black. Designed to bolt right up to your car, the 349 fits perfectly without modification.

Small but mighty, the Neodymium super magnet in an ECS Tuning magnetic drain plug collects wandering metallic particles and holds them captive until they can be wiped away at the next oil change. Next oil change? Install an ounce of prevention with a drain plug that catches and holds ferrous particles with an iron grip, before they can cause expensive engine damage.

Without a high quality performance intercooler, the charged air leaving your turbocharger is rendered ineffective. Intense cooling is required before the more dense air reaches your engine intake to make power. ECS supplies several performance intercooler options for your BMW E82/88 135i. The Mishimoto Performance Intercooler reduces intake temperatures by up to 35°, providing an increase of up to 20+ hp, while the Forge kit includes new silicone hoses and clamps. The Cobb Tuning System is also available, using a unique stepped design to increase frontal surface area.

Forge is now offering a stunning coolant tank replacement for the R52/R53 supercharged MINI engines. The polished alloy tank is a direct-fit replacement for the factory unit, and completely resists the cracking and fading of the original part. The alloy coolant tank also adds a high-performance, premium look to your engine bay.

Small but mighty, the Neodymium super magnet in an ECS Tuning magnetic drain plug collects wandering metallic particles and holds them captive until they can be wiped away at the next oil change. Next oil change? Install an ounce of prevention with a drain plug that catches and holds ferrous particles with an iron grip, before they can cause expensive engine damage.

Adding performance styling upgrades to your F10 5 Series requires careful consideration and taste to pull off without looking tacky and out of place. Genuine BMW Performance parts are made for your specific model by BMW guaranteeing enduring appeal and unmatched taste. M Performance Stainless Steel Pedals are simple upgrades that yield a huge gain in performance styling. Available for both automatic and manual transmissions, genuine BMW pedal upgrades are an easy way to bring authentic motorsports tradition to your interior.

Alzor 881 wheels have the look and feel of an instant favorite. With their bold arched split-spoke design and eye-catching hyper silver finish with polished lip, this wheel set is just the finishing touch you've been looking for. Combine their muscular 18 x 8.5 or 9.5 physique with your newly lowered suspension and watch it all come together in an overall styling statement that's sure to turn heads. When you see how much they won't cost you, the choice is a four-gone conclusion.

Excessive vibration felt inside the cabin of your W14O Chassis S-Class is typically caused by worn or failing drivetrain mounts. As the factory rubber degrades over time, the engine loses a secure connection to the chassis, decreasing throttle response and a feeling of connectedness throughout the drivetrain. ECS-assembled and genuine OEM Mercedes-Benz Drivetrain Mount Kits resolve this problem beautifully, with two replacement motor mounts, a transmission mount and all required replacement hardware.

The best way to address your accessory belt, tensioners, and idler pulley is to invest in a complete kit with new replacement hardware. ECS assembled and genuine OEM Accessory Belt Service Kit contain each part required to completely rebuild your accessory system. You get two accessory belts, hydraulic tensioner assembly, idler and tensioner pulley, A/C belt tensioner, and all hardware required for a clean install.

A truly transformative yet simple exterior upgrade, FK European Smoked Headlights offer a broader more crisp beam pattern and increased brightness without increased bulb wattage. The FK kit includes driver and passenger side headlights, with integrated angel eyes, a blacked-out housing, and the crisper European projected beam pattern. Included is a wiring harness for plug-and-play installation - choose a set of H7 halogen bulbs for the high/low beams and a set of H3 bulbs for the fog lights.

Small but mighty, the Neodymium super magnet in an ECS Tuning magnetic drain plug collects wandering metallic particles and holds them captive until they can be wiped away at the next oil change. Next oil change? Install an ounce of prevention with a drain plug that catches and holds ferrous particles with an iron grip, before they can cause expensive engine damage.

You won't believe the difference an LED lighting package makes on your car until you see it with your own eyes. LED illumination is a far brighter and friendlier light, crisp and clean, especially when compared to the dingy yellow glow from conventional filament style bulbs. Ziza lighting is proud to introduce LED license plate bulbs for your C5 A6 that will not cause a "bulb out" warning. These are direct replacement bulbs that install in minutes, there is no need to wire up fancy resistors or rework your factory wiring to get them functioning properly.

Excessive vibration felt inside the cabin of your W124 300E is typically caused by worn or failing drivetrain mounts. As the factory rubber degrades over time, the engine loses a secure connection to the chassis, decreasing throttle response and a feeling of connectedness throughout the drivetrain. ECS-assembled and genuine OEM Mercedes-Benz Drivetrain Mount Kits resolve this problem beautifully, with two replacement motor mounts, a transmission mount and all required replacement hardware.

The best way to address your accessory belt, tensioners, and idler pulley is to invest in a complete kit with new replacement hardware. ECS assembled and genuine OEM Accessory Belt Service Kit contain each part required to completely rebuild your accessory system. You get two accessory belts, hydraulic tensioner assembly, idler and tensioner pulley, A/C belt tensioner, and all hardware required for a clean install

This wood dash pattern for the five piece dash adds a little classic Mini tradition to your MINI. Dash is in plastic with high gloss burl wood pattern. This addition is easy to install and matches other wood accessories. Snaps right into dash once old section is removed. Airbag section is just the cover and tether mount. This kit comes with left small section, drivers section, center section, air bag cover section, and right small section to complete the 5 piece wood dash look.

Maintaining adequate tension on the timing chain is its most basic purpose, keeping the correct level of slack in the chain to best balance noise levels and friction reduction. The second function of this deceptively advanced part is controlling cam timing, maintaining power through all rpms by rapidly adjusting the valve opening and closing event. ECS offers the Üro Cam Chain Tensioner, allowing your 1.8T the opportunity to make maximum power & maintain efficient timing chain operation.

A truly transformative yet simple exterior upgrade, FK European Smoked Headlights offer a broader more crisp beam pattern and increased brightness without increased bulb wattage. The FK kit includes driver and passenger side headlights, with integrated angel eyes, a blacked-out housing, and the crisper European projected beam pattern. Included is a wiring harness for plug-and-play installation - choose a set of H7 halogen bulbs for the high/low beams and a set of H3 bulbs for the fog lights.

Wheel bearings are one of the most crucial components of a car's suspension. Located in the wheel hub, brake drum, or rotor itself, the bearings support the full weight of the vehicle while allowing the wheels to rotate smoothly within a steel enclosure. Dysfunctional bearings are simply the result of the rigors of daily driving, and should be replaced at the first sign of failure. Worn bearing symptoms range from loud noise emanating from the wheel hubs to rough ride characteristics. ECS presents several bearing solutions for your convenience.

Small but mighty, the Neodymium super magnet in an ECS Tuning magnetic drain plug collects wandering metallic particles and holds them captive until they can be wiped away at the next oil change. Next oil change? Install an ounce of prevention with a drain plug that catches and holds ferrous particles with an iron grip, before they can cause expensive engine damage.

Alzor 881 wheels have the look and feel of an instant favorite. With their bold arched split-spoke design and eye-catching hyper silver finish with polished lip, this wheel set is just the finishing touch you've been looking for. Combine their muscular 18 x 8.5 or 9.5 physique with your newly lowered suspension and watch it all come together in an overall styling statement that's sure to turn heads. When you see how much they won't cost you, the choice is a four-gone conclusion.

GEOMET® is a special coating containing metal oxides, zinc, and aluminum flakes, sprayed over the entire rotor surface to ensure complete coverage, and baked on at 600 degrees to form a durable and attractive silver-gray finish that fights rust far better than paints or other conventional coatings. Slotted or drilled and slotted, you can expect your new GEOMET® rotors to outperform and outlast stock rotors, and look great behind your alloy wheels.

Your B5 Passat features highly individualized design elements that make successfully complementing the vehicle with aftermarket wheels a serious challenge. The Alzor Style 349 features a split-spoke design that accentuates rather than distracts from the Passats natural musculature. Finished in hyper silver. Designed to bolt right up to your car, the 349 fits perfectly without modification. Available in 17x7.5" | 18x8.0" | 18x9.0" | 19x8.5" | 19x9.5" | Square or Staggered

AutoPilot has developed an extraordinary Air Ride Kit for the B6 Passat distinguished by its simplicity of installation and V2 Digital Management ride height control. This kit is complete - everything you need to drop your car right to the ground is included, from the Viair 380 Compressor, air-over shocks with 30-level damping adjustment, and rear double-bellows air springs, to the AutoPilot V2 Digital Controller, 1/4′ & 3/8′ PTC fittings, and all required mounting hardware. Easily achieve a staggering 147mm/5.8" drop at the touch of a button.

Alzor 881 wheels have the look and feel of an instant favorite. With their bold arched split-spoke design and eye-catching hyper silver finish with polished lip, this wheel set is just the finishing touch you've been looking for. Combine their muscular 18 x 8.5 or 9.5 physique with your newly lowered suspension and watch it all come together in an overall styling statement that's sure to turn heads. When you see how much they won't cost you, the choice is a four-gone conclusion.

Alzor 881 wheels have the look and feel of an instant favorite. With their bold arched split-spoke design and eye-catching hyper silver finish with polished lip, this wheel set is just the finishing touch you've been looking for. Combine their muscular 18 x 8.5 or 9.5 physique with your newly lowered suspension and watch it all come together in an overall styling statement that's sure to turn heads. When you see how much they won't cost you, the choice is a four-gone conclusion.

The E36 has a hard time keeping fog lights from getting cracked or broken mostly from road debris due to their low to the ground location. Why just replace your fog lights when you can get that European look with Ziza yellow lens fog lamps. This is a popular look desired by many BMW enthusiasts, now available from ECS Tuning.