Easy installation and more reliable charge cooling
Requires a build time of up to two weeks
For vehicles with 13mm MAP port only
Easy installation and more reliable charge cooling
Requires a build time of up to two weeks
For vehicles with 13mm MAP port only
Designed for dedicated drag or drift cars. Conservatively rated at 575ft/lbs.
Includes flywheel
Includes a new alternator, power steering and crank pulley that allows you to use a stock belt.
10X Entries Into Our F80 M3 Sweepstakes
Vehicles with clutched alternator pulley require hardware kit - ES271279 for installation
This product was last offered at the strikethrough price on
06-13-2026
AEM?s 340LPH High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles.
This is a general-use high flow fuel pump, not a direct plug-and-play swap in most applications
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
11-03-2026
Designed for high-powered street cars while capable enough to handle the track. Conservatively rated at 470ft/lbs.
Works with stock dual mass flywheel
Designed for high-powered street cars while capable enough to handle the track. Conservatively rated at 470ft/lbs.
Works with stock dual mass flywheel
Max Torque 517ft. lbs.
This product was last offered at the strikethrough price on
09-30-2026
Works as a replacement for most Bosch fuel pressure regulators. Adjustable from 3.3-5 BAR
2X Entries Into Our F80 M3 Sweepstakes
Featuring track density mounts and billet aluminum dogbone mount
2X Entries Into Our F80 M3 Sweepstakes
For vehicles with manual transmission only
Max Torque 350ft. lbs.
Max Torque 517ft. lbs.
Stock sized valve head diameter, factory triple groove keeper setup - Includes Supertech valves and IE valve seals
10X Entries Into Our F80 M3 Sweepstakes
*Existing factory triple-groove valve keepers are to be reused*
Great for when more fuel is needed in a custom fueling application
Max Torque 411ft. lbs.
Takes 1.8L 06A engine to 2.0L (2008cc), by increasing the stroke and bore of the engine
Requires block machine work (+2mm overbore) - To be used in conjunction with IE 2.0L Stroker Crank (IESKVA6) and 144x20 connecting rods
piston set with the strength to withstand high power numbers
Requires 2mm overbore