Complete set of Ferrea high performance valve springs, and titanium retainers
Complete set of Ferrea high performance valve springs, and titanium retainers
Colder iridium plug for performance applications
Recommended spark plug to be used with the Golf R (IS38) Turbo Upgrade
Prevent crankcase oil fumes from filling your intake piping, turbo piping, intercooler, intake manifold, and breather system
*Universal Fitment - Custom Install Required - Does not include fittings, adapters, or hose ends*
Fully polished 2.25" system
For vehicles featuring a "non-cutout' rear valance
High-Flow Low-Current WMI Solenoid - 200PSI 1/8in-27NPT In/Out
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
10-25-2026
Includes the necessary parts to raise your fuel rail for larger injectors
10X Entries Into Our F80 M3 Sweepstakes
This product was last offered at the strikethrough price on
06-13-2026
Includes cleaner and re-oil additive
Gain up to 87 horsepower and 106 lb-ft of torque on 93 Octane
This tune can be performed at home with the included UniCONNECT+ cable. Only available for purchase in th
Requires Unitronic 3 Inch Downpipe
144x21 Forged Rod with ARP 2000 hardware.
This product was last offered at the strikethrough price on
09-09-2026
Closed airbox system for added filtration and performance
For vehicles without secondary air injection only
Flow-bench optimized to provide maximum performance with your factory intake system!
Call In Or Chat For Best Price!
This product was last offered at the strikethrough price on
09-28-2026
For Hemi 80mm throttle body
For vehicles with large port cylinder head only. Vehicles with small port will require ES2794391.
For stock 60mm throttle body
For vehicles with large port cylinder head only. Vehicles with small port will require ES2794391.
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 82mm bore (1mm overbore), 9.25:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*