Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 82mm bore (1mm overbore), 9.25:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Set of 6
5X Entries For Our 25th Anniversary Sweepstakes!
Includes rings, wire locks, and wrist pins - 82mm bore, 9:8 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 9:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Increase bottom-end reliability when adding horsepower
Keep your engine block from flexing under torque
5X Entries For Our 25th Anniversary Sweepstakes!
+1mm oversized valve head diameter, single groove keeper setup for high RPM use - Includes Supertech valves, single groove keepers and IE valve seals
10X Entries For Our 25th Anniversary Sweepstakes!
*Oversized valves require extra machine work to the cylinder head.*
Stock sized valve head diameter, single groove keeper setup for high RPM use
*Valves priced individually - For 1.8T - qty 12 needed / For 2.7T - qty 18 needed - Please see long description for additional valve seal/keeper informa
Stock sized valve head diameter, single groove keeper setup for high RPM use - Includes Supertech valves, single groove keepers and IE valve seals
10X Entries For Our 25th Anniversary Sweepstakes!
Billet main caps for your high horsepower extreme build, specifically designed to be used with a girdle kit.
5X Entries For Our 25th Anniversary Sweepstakes!
Designed to handle over 6,500rpm with no problems
Designed to work with OEM upper spring retainer.
Stock sized valve head diameter, single groove keeper setup for high RPM use - Includes Supertech valves, single groove keepers and IE valve seals
10X Entries For Our 25th Anniversary Sweepstakes!
Stock sized valve head diameter, single groove keeper setup for high RPM use
*Valves priced individually - For 1.8T - qty 8 needed / For 2.7T - qty 12 needed - Please see long description for additional valve seal/keeper informati
Single groove performance