ECS News

Sharpened handling. Increased agility. Tactile responsiveness. A feeling of being one with car and road. Replacing stock bushings with Powerflex polyurethane components will deliver all that and more. ECS is proud to present the Powerflex brand of performance bushings. Powerflex is a world-renowned name in high-performance products, and they manufacture an array of quality suspension and chassis components. From subframe mounts to control arm and sway bar bushings and more, nothing overpowers the Powerflex catalog and their reputation for durability and quality.

Keep your cuts clean and your connections clamped tight with these new Schwaben tools. The CV boot clamp pliers will assist in maintaining the factory look by utilizing ear-type clamps found on CV axle boots, vacuum lines, and fuel lines right from the factory. The Schwaben mini tube cutter will cut hardlines with a smooth, straight finish making it easy to flare and fit. For the enthusiasts looking to complete a job, and leave it with the appearance that it was never touched.

Coming to a finish of an under-the-hood project is a sight that any enthusiast can enjoy. The other finish we enjoy the sight of is the paint finish, unblemished and grease free. The best way to ensure you maintain this appearance while working under the hood is with a fender cover. The ECS Magnetic fender cover features Soft magnets to hold tight in place, soft non-scratch leather on the front, and goose flannelette backing. Don't risk it, stay covered.

The Audi R8 is the definition of style, but sadly, there are not many items that can go from it to the Volkswagen MKIV. The engine won't fit and the transmission won't either, but if you are determined to get some of the R8 style on your car, this new LED Trunk Light Retrofit Kit from ECS Tuning is for you. When you open your trunk hatch, you will be bathed in white light, allowing you to see everything like never before. They will look brilliant and last for years. No matter if you enjoy a bit of late night shopping, or if you want to show off a nice sound system, this kit is it.

A failed air injection pump is more than a noisy annoyance. Bad pumps store a fault code and turn on your check engine light, a sure way to fail your local emissions test. Dying pumps don't go quietly. As they fail, they make a loud buzzing noise, audible shortly after a cold engine start up; continuing for a minute or so after that. Our secondary air pump can put your air injection system back to normal, eliminate all that racket, and turn off that pesky dash light.

Everything you need to upgrade your Front And Rear brakes in an afternoon in one simple kit from ECS Tuning. Featuring ECS GEOMET slotted or drilled and slotted rotors and Hawk HPS pads. Outperform and outlast stock brakes, not to mention the durable and attractive silver-gray finish that fights rust looks great behind your alloy wheels. A complete matched kit assembled by our team of experts, will keep all of your brake components working in perfect harmony.

The easiest, most transformative modification for your VW is a set of new, perfectly selected wheels. Alzor wheels offers an array of 5x100 bolt pattern wheels for your VW available in various colors, finishes, and spoke designs. The entire line of Alzor alloy wheels are inspected and go through rigorous quality control and durability testing. Every wheel comes with a TÜV Rheinlan approval and is stamped with the familiar JWL and VIA stamps, giving you the confidence to drive aggressively on your new running gear.

The easiest, most transformative modification for your VW is a set of new, perfectly selected wheels. Alzor wheels offers an array of 5x100 bolt pattern wheels for your VW available in various colors, finishes, and spoke designs. The entire line of Alzor alloy wheels are inspected and go through rigorous quality control and durability testing. Every wheel comes with a TÜV Rheinlan approval and is stamped with the familiar JWL and VIA stamps, giving you the confidence to drive aggressively on your new running gear.

The easiest, most transformative modification for your VW is a set of new, perfectly selected wheels. Alzor wheels offers an array of 5x112 bolt pattern wheels for your VW available in various colors, finishes, and spoke designs. The entire line of Alzor alloy wheels are inspected and go through rigorous quality control and durability testing. Every wheel comes with a TÜV Rheinlan approval and is stamped with the familiar JWL and VIA stamps, giving you the confidence to drive aggressively on your new running gear.

If you're running a performance filter, intake, or tune, the factory turbo inlet hose will start to show its weaknesses. The OEM rubber hose disrupts airflow as it passes over the often collapsed accordion sections, negating the effects of intake modifications. Engineered in-house, the ECS Silicone Turbo Inlet Hose is constructed from high quality, 3-ply silicone providing a strong though flexible structure, ensuring a perfect fit. The smooth interior provides unimpeded airflow, while a tasteful unassuming exterior appearance adds a classy touch to your MKIV GTI 1.8T engine bay.

The MKIV Jetta came from the factory with a poor glove box design. Instead of replacing the broken unit with a used part that is bound to fail again, fix the problem permanently with the updated Glove Box Lid with redesigned hinge. This part is an exact color match for the Jetta, and because it's an OEM part, fitment and quality are guaranteed.

If you spend time and money renewing your brake hardware and linings, you ought to consider upgrading to ECS Tuning Exact-Fit brake hoses, and do the job right. These premium brake hoses are stronger, more durable, and better protected than the originals. They are shielded in stainless steel mesh reinforcement, and coated with bright red vinyl for added protection. Available by the axle for front, or as a kit, our DOT-Compliant tailored hoses come with OE attachment fittings and sealing washers.

ANSA has been designing and manufacturing performance exhaust systems for over half a century. ANSA Silverline direct-fit exhaust systems are engineered to improve your vehicle’s overall performance by generating more horsepower and torque, as well as emitting a wonderful engine note. Designed in Italy, this beautifully made, fully polished stainless steel cat-back exhaust system is made to extend the tips under the stock non cut-out valances on model years 1999-2001. ANSA Silverline series exhaust systems carry a 2-year warranty for the original owner.

It's the new year, it's time for some new tools. Every one of these Schwaben tools are built to last and are easy to use. The Thread Chaser Set includes the most popular metric sizes so you can restore corroded, damaged or stripped threads.The Metric Bubble Flaring kit is a must have for anyone replacing steel brake lines. The Memory Saver Kit allows you to connect a separate power source (9 volt household battery, or separate 12 volt battery) up to your OBDII port under the dashboard when replacing a battery, preserving radio presets and settings, and other vehicle memory.

Knock, knock. Who's there? If your MKIV suspension is knocking, trust us, it's no joke. When your control arm bushings start clangin' and bangin', they're warning you that they need to be replaced. Problem is, most of us don't have access to the equipment needed to install fresh bushings in old control arms. Make your suspension work easier and get your arms swapped out fast with this complete lower control arm kit. Save time with this pre-made kit allowing you to bolt your control arms right up.

The Schwaben 6-Liter Extractor/Filler System makes changing oil, ATF, or any type of fluid easy and mess free. This easy to use tool is no doubt the best Extractor/Filler for the money. Easily change to pump in or out with the flip of a lever, and use the extendable foot step for stability while pumping. All of the included adapters mount on the tank for convenient storage. This is a manual pump which requires no electricity or air pressure to operate, and has a built in pressure/vacuum gauge for easy monitoring to prevent overpumping.

The tie rods are the link between the steering rack and the steering knuckle on your MKIV Jetta. They utilize a ball socket to articulate movement while driving, but they will eventually wear out, causing uneven tire wear, loose steering, and noises over bumps or around corners. The experts at ECS Tuning have built these complete tie rod kits which will allow you to get the job done right the first time. Replace your tie rods today and gain back the tight, responsive steering your car once had.

Knock, knock. Who's there? If your MKIV suspension is knocking, trust us, it's no joke. When your control arm bushings start clangin' and bangin', they're warning you that they need to be replaced. Problem is, most of us don't have access to the equipment needed to install fresh bushings in old control arms. Make your suspension work easier and get your arms swapped out fast with this complete lower control arm kit. Save time with this pre-made kit allowing you to bolt your control arms right up.

This is the solution for users wanting to use lowering springs while extending shock life. These shocks from Koni offer you the ability to use lowering springs while keeping ride quality comfortable. Designed for lowered applications, these shocks and struts won't wear prematurely. Performance oriented shocks and struts from Koni carry a lifetime warranty! Drop that car with some Koni shocks today from ECS Tuning.

ANSA has been designing and manufacturing performance exhaust systems for over half a century. ANSA Silverline direct-fit exhaust systems are engineered to improve your vehicle’s overall performance by generating more horsepower and torque, as well as emitting a wonderful engine note. Designed in Italy, this beautifully made, fully polished stainless steel cat-back exhaust system is made to extend the tips under the stock non cut-out valances on model years 1999-2001. ANSA Silverline series exhaust systems carry a 2-year warranty for the original owner.

Things getting a little flabby south of the hood latch? Is mashing on the "go" pedal producing wheel hop or worrisome driveline vibration? If your factory mounts have thrown in the towel, don't waste your time installing more of the same. Move up to tough and durable mounts and bushings from ECS Tuning. Made of premium aluminum, plated steel, and potent polyurethane, our mounts and bushings are made for anyone who wants something more than parts designed for "average" drivers

Sharpened handling. Increased agility. Tactile responsiveness. A feeling of being one with car and road. Replacing stock bushings with Powerflex polyurethane components will deliver all that and more. ECS is proud to present the Powerflex brand of performance bushings. Powerflex is a world-renowned name in high-performance products, and they manufacture an array of quality suspension and chassis components. From subframe mounts to control arm and sway bar bushings and more, nothing overpowers the Powerflex catalog and their reputation for durability and quality.

The factory shifter cable bracket system fitted to the MKIV GLI has been identified as a source of sloppy shifts, missed gears, bracket and bushing failure, and even transmission failure. Extended exposure to heat causes the plastic OE shifter cable bracket to flex and eventually break. APR has designed a Solid Shifter Cable Bracket to permanently resolve this factory design oversight. Utilizing CNC-machined solid mounts to eliminate the failure-prone rubber bushings, and cast 304 stainless steel to replace the flexible plastic bracket, this APR upgrade is the final solution.

Guesswork is expensive. It leads to costly repair errors that compromise vehicle safety. Talented pro-sumer or repair professional, you need accurate vehicle data and specifications. That's why ECS is happy to offer an entire inventory of Bentley manuals, a reliable, respected source of repair data for many European vehicles. Books or CDs, all are carefully edited and illustrated. A worthwhile investment.

Guesswork is expensive. It leads to costly repair errors that compromise vehicle safety. Talented pro-sumer or repair professional, you need accurate vehicle data and specifications. That's why ECS is happy to offer an entire inventory of Bentley manuals, a reliable, respected source of repair data for many European vehicles. Books or CDs, all are carefully edited and illustrated. A worthwhile investment.

Why use wheel studs instead of wheel bolts? When removing and installing wheels that utilize the factory wheel bolts, excessive, unnecessary wear is placed on the wheel hub itself. This premature wear on an expensive component is costly and difficult to repair. Wheel studs also allow the use of varying length wheel spacers - a highly convenient feature for those that anticipate using different spacer size setups in the future. Both conical and ball seat lug nuts are available for a maximum of 10mm or 20mm wheel spacer use.

Things getting a little flabby south of the hood latch? Is mashing on the "go" pedal producing wheel hop or worrisome driveline vibration? If your factory mounts have thrown in the towel, don't waste your time installing more of the same. Move up to tough and durable mounts and bushings from ECS Tuning. Made of premium aluminum, plated steel, and potent polyurethane, our mounts and bushings are made for anyone who wants something more than parts designed for "average" drivers

Things getting a little flabby south of the hood latch? Is mashing on the "go" pedal producing wheel hop or worrisome driveline vibration? If your factory mounts have thrown in the towel, don't waste your time installing more of the same. Move up to tough and durable mounts and bushings from ECS Tuning. Made of premium aluminum, plated steel, and potent polyurethane, our mounts and bushings are made for anyone who wants something more than parts designed for "average" drivers

Those who own a vehicle with gas hood shocks know they aren't always reliable if they even work at all. The Schwaben Telescoping hood prop takes the risk out of being in the engine bay, especially on a windy day. This hood prop is adjustable, lightweight, and sturdy making it easy to keep out of the way in the trunk so its there anytime you need it. Hold up, here's an extra hand

The 3-Liter European Pressure brake bleeder is designed to bleed and flush your brake system like a pro. This easy to use fully loaded pressure bleeder is no doubt the best pressure bleeder for the money. The customers looking for more, upgrade to the Multi-functional fluid pump kit that does all this plus and be used as an ATF filler. For those that prefer to leave flushing your brakes to the shop we offer a smaller fluid bleeding only option that comes in handy when doing brake jobs. Both products ensure your satisfaction in pedal feel and ease of use.