IE Street Intake Camshaft for 300+ Horsepower Builds!
5X Entries For Our 25th Anniversary Sweepstakes!
IE Street Intake Camshaft for 300+ Horsepower Builds!
5X Entries For Our 25th Anniversary Sweepstakes!
Set of 4, rifle drilled
5X Entries For Our 25th Anniversary Sweepstakes!
Stock sized valve head diameter, factory triple groove keeper setup - Includes Supertech valves and IE valve seals
10X Entries For Our 25th Anniversary Sweepstakes!
*Existing factory triple-groove valve keepers are to be reused*
Takes 1.8L 06A engine to 2.0L (2008cc), by increasing the stroke and bore of the engine
Requires block machine work (+2mm overbore) - To be used in conjunction with IE 2.0L Stroker Crank (IESKVA6) and 144x20 connecting rods
piston set with the strength to withstand high power numbers
5X Entries For Our 25th Anniversary Sweepstakes!
Requires 2mm overbore
IE Race Exhaust Camshaft for 500+ Horsepower Builds!
5X Entries For Our 25th Anniversary Sweepstakes!
IE Race Intake Camshaft for 500+ Horsepower Builds!
5X Entries For Our 25th Anniversary Sweepstakes!
Billet main caps for your high horsepower extreme build
5X Entries For Our 25th Anniversary Sweepstakes!
Set of 6
5X Entries For Our 25th Anniversary Sweepstakes!
Complete set of Ferrea high performance valve springs, and titanium retainers
5X Entries For Our 25th Anniversary Sweepstakes!
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 82mm bore (1mm overbore), 9.25:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Set of 6
5X Entries For Our 25th Anniversary Sweepstakes!
Includes rings, wire locks, and wrist pins - 82mm bore, 9:8 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 9:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*