Everything you need to increase response and durability of your DV.
For vehicles with FSI engines only
Everything you need to increase response and durability of your DV.
For vehicles with FSI engines only
Based on a BorgWarner K04-064 frame
Modifications necessary for proper fitment. Please see description.
T6-6061 Billet Aluminum Engineered to Fill Void In Factory Transmission Mount
2X Entries Into Our F80 M3 Sweepstakes
For vehicles up through the 2008 model year only
DIY Breather Port Adapter To Allow a Provision For Custom Catch Can Setups On The Audi/VW 2.0T FSI - Uses -10AN Fittings
2X Entries Into Our F80 M3 Sweepstakes
*Allows for custom catch can installation on 2.0T FSI engines*
For vehicles with FSI engines only.
Includes rings, wrist pins, and pin locks - 82.5mm bore, 9.5:1 CR
For vehicles with FSI engines only
This product was last offered at the strikethrough price on
10-05-2026
Robust protection for your WMI installation to ensure peace of mind
Rev Higher without worry, requires single groove valve keepers
Garrett GEN2 GTX3076R dual ball bearing turbocharger with a T04E frame (4" inlet and 2" outlet compressor housing) and a .61 A/R Divided (Twin-scroll) V-Band Inlet and GT 3" V-Band outlet turbine housing (Ni-Resist Material).
Used for custom, big turbo applications only - ECS Tuning does not offer support on tuning, fueling, exhaust manifold, etc
Featuring stainless steel construction and dual, 80mm polished tips
Reduce restriction and improve turbo efficiency with ECS High Flow Turbo Muffler Delete Pipe Kit
10X Entries Into Our F80 M3 Sweepstakes
For use with ECS High Flow Turbo Outlet Pipe
For vehicles with TSI engine only
This product was last offered at the strikethrough price on
06-13-2026
2.5" stainless steel with dual 3.2" polished stainless tip
In House Engineered "Air Technology" for maximum performance and stunning aesthetics
10X Entries Into Our F80 M3 Sweepstakes
For vehicles with FSI engines only
This product was last offered at the strikethrough price on
06-13-2026
Mahle Motorsport/Vandervell Race Main Bearing Set for VW/Audi 4 Cylinder
Fits vehicles with FSI engines only
Set of 4 connecting rods, to be paired with 21mm wrist pin aftermarket pistons (JE, Wiseco, Mahle ETC)
For vehicles with TSI engines and for use with aftermarket pistons with 21mm wrist pin only.
Crafted from mandrel bent T304 Stainless Steel and replaces the rear exhaust section from the downpipe back.
2X Entries Into Our F80 M3 Sweepstakes
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
10-10-2026
Serious engine oil cooling for the most demanding engines