ECS News

The MKV Jetta has always looked great with a lowered ride height - this model seems to fit a more aggressive stance better than most. ECS now offers superb Performance Spring Kits from Neuspeed, Megan Racing, H&R, VWR, Autotech, Eibach, and Volkswagen, each designed to retain the driveability and ride compliance most owners demand while achieving the performance stance that suits your VW so well. Average lowering ranges from 1.2" to 2", allowing you to choose the Sport or Race Spring Set that best matches your driving style and preferred handling dynamics.

Only a company as experienced with VW performance innovations as Neuspeed could develop a product so deeply effective and simple to operate. The Power Module allows your 1.8T/2.0T Gen3 ECU to safely increase boost levels by a precise amount without changing factory ECU programming, communication or safety protocols. Net up to 35-40+ HP with 4-6 PSI increases, all controlled via the simple two-position switch.

The factory springs on your VW were designed to exacting standards by some of the world's most talented engineers. Replacing this component requires careful consideration - especially if you're concerned with making a lasting improvement to your vehicle. These highly affordable suspension packages eliminate guesswork by combining full height adjustment at all four corners with matching dampers, engineered with fixed, pre-calibrated settings to improve ride quality.

There are several critical automotive projects that require pulling fluid lines – these jobs oftentimes end in an unnecessary mess from using inadequate tools and procedures. The tool experts at Schwaben have developed the highly convenient Fluid Stopper Kit for this reason, allowing you to properly clamp any fluid hoses and avoid messes or fluid losses. Additionally, the clamps offer a temporary seal, meaning you will not compromise any lines for later use. Address all common hard lines, including fuel lines, brake lines, and banjo connections.

Many enthusiasts have had to do a tie rod service on their vehicle at one point or another, and many have had to deal with stubborn tie rods. The Schwaben Inner Tie Rod tool makes it as easy as it looks by automatically adjusting to the right size while in use, giving you the proper leverage required to break the tie rod free - A must have that can cut hours down on your job. The other difficult area of a tie rod replacement is getting the ball joint end at the knuckle to break loose. The Schwaben tie rod separator is perfect for wedging in between the knuckle and ball joint.

The VWR RacingLine Cold Air Intake System is superior to typical aftermarket intakes because it utilizes the already effective factory cold-air routing, drawing air from outside the engine bay, avoiding power-robbing heat soak. Developed for use in Volkswagen Racing cars, the VWR system produces proven power gains throughout the entire rpm range. The larger diameter, fully-enclosed black anodized aluminum intake reduces airflow restriction, decreasing turbo spool time and enhancing overall turbo efficiency.

WatercooledIND, with their characteristic vibrancy and creativity, is releasing a stunning new ECS-exclusive wheel - the SY10. From start to finish, SY10s are meticulously designed and engineered to be as light as they are strong. This latest release, available only through ECS Tuning, is a creative interpretation of the classic split 10-spoke design. The details in the wheel's machined face add dimension to the surface, while the WCI engraving and gorgeous silver finish make a visual statement that will redefine your VW's presence.

WatercooledIND, with their characteristic vibrancy and creativity, is releasing a stunning new ECS-exclusive wheel - the SY10. From start to finish, SY10s are meticulously designed and engineered to be as light as they are strong. This latest release, available only through ECS Tuning, is a creative interpretation of the classic split 10-spoke design. The details in the wheel's machined face add dimension to the surface, while the WCI engraving and gorgeous silver finish make a visual statement that will redefine your VW's presence.

WatercooledIND, with their characteristic vibrancy and creativity, is releasing a stunning new ECS-exclusive wheel - the SY10. From start to finish, SY10s are meticulously designed and engineered to be as light as they are strong. This latest release, available only through ECS Tuning, is a creative interpretation of the classic split 10-spoke design. The details in the wheel's machined face add dimension to the surface, while the WCI engraving and gorgeous silver finish make a visual statement that will redefine your MKVI Golf's presence.

ECS now supplies four of the top Performance Intake Systems available for your Volkswagen MKVI Jetta 2.5L. Choose from Neuspeed, AEM, and AFE Power upgrades - each one has been proven to increase air intake volume while enhancing the induction sound of your engine. More air available means more potential power - it's for this simple reason that an easy-to-install performance intake from ECS should be first on your list of engine upgrades for your Jetta.

Most aftermarket boost gauges look like add-ons. The dial numbers and lighting don't match the factory gauges and many use a poorly-thought out mounting system that appears out of place. ECS believes your boost gauge should be easy to see, and blend with your interior. That's why we've developed all-new boost gauge kits for your VW MKVI 2.0T. The gauge design and lighting blend with other dash gauges to give it a sophisticated, factory-installed look. We've even prepared a detailed photo tutorial outlining the installation, so the fun can start as soon as you open the box.

If you want to turn every head on the street as you drive by, then look no further. Beauty and muscle have met their match with the stunning looks of wheels from 3SDM and Neuspeed. With bold eye catching colors such as satin bronze, machine silver, red, gunmetal, and more, these wheels are the finishing touch you've been looking for. Combining their muscular looks and the beauty of their timeless designs with your lowered suspension will guarantee a breath-taking appearance. And when you see how affordable they are, they'll be as good as yours!

Schwaben Specialty Tools has been making at-home vehicle repair more simple and more professional with each successive release. Each member of their unparalleled catalog represents a significant achievement in tool design and engineering; their Drain and Fill Service Tools are excellent examples of Schwaben's success. The 5" Diameter Funnel features a 12"-24" flexible neck, making transmission and differential fluid change service procedures quicker and cleaner. Schwaben's 6-10 liter Oil Storage Cans allow for a mess-free oil change and easy transport of all drained oil.

Companies that dedicate themselves to a specific industry niche have a head start on large, excessively diverse manufacturers. A familiarity with the challenges of making superior products is gained through the sheer time spent within a more narrow market. Sonax produces car care products. Each release by the company is a leader in its category, & their catalog is growing every day. ECS offers a staggering array of Sonax products, from the highly effective acid-free Wheel Cleaner, to deep-cleaning & odor-eliminating Upholstery/Carpet Cleaner and Premium Class Carnauba.

Get your MKV Jetta trim and fit with VW original side skirts from the GLI. This complete kit includes two side skirts and original equipment attachment hardware and fasteners for a durable, lasting installation. Left black or color-matched, this bold accent completes the lower profile, giving your Jetta a muscular, glued-to-the-road look that complements your new wheels and tires, and makes a lowered stance look even lower.

Three new outstanding carbon fiber offerings are now available for the MKVI GTI - each bringing a much-needed dimension of performance aesthetics to the VW. The true Carbon Fiber Front Lips are ECS-original visual enhancements, available as a clean OE-style, subtle aftermarket style, or radical front diffuser. If your vehicle was fitted from the factory with a front lip, the new ECS unit will screw into the same location as the original. Each ECS part is made of authentic, hand laid carbon fiber with pre-impregnated carbon fiber cloth and epoxy resin for ultimate durability.

VWR parts, as developed by Volkswagen Racing UK for their competition racecars, have released RL Carbon Fiber Front and Rear Spoilers for the VW MKVI Golf R. The authentic 3K carbon twill spoilers add a subtle but distinctive look to your VW. Install it as is for a carbon fiber accent or color-match to the rest of your car. Both front and rear spoilers are easily installed with the included adhesive strip, requiring little effort for a powerful, aggressive VWR upgrade.

Many VWs have logged significant miles to date, and most have road-weary suspension setups. KONI Struts and Shocks have been a favorite replacement choice for performance enthusiasts; they offer a perfect blend of even, more stable handling dynamics with ride compliance & comfort. KONI fine tunes their shocks & strut kits by application, refusing to take the 'one-size-fits-all' approach used by less thorough manufacturers. Available with Frequency Selective Damping (FSD) technology, KONI shocks & struts are a wise performance upgrade for your VW MKV Jetta.

Many VWs have logged significant miles to date, and most have road-weary suspension setups. KONI Struts and Shocks have been a favorite replacement choice for performance enthusiasts; they offer a perfect blend of even, more stable handling dynamics with ride compliance & comfort. KONI fine tunes their shocks & strut kits by application, refusing to take the 'one-size-fits-all' approach used by less thorough manufacturers. Available with Frequency Selective Damping (FSD) technology, KONI shocks & struts are a wise performance upgrade for your MKVI Jetta.

Neuspeed has been developing performance parts for European automobiles for decades, improving their catalog with each stellar release. Performance products for your VW MKVI Golf R are now available through ECS tuning. The excellent Front Mount Intercooler flows more cool air to your intake manifold while the new P-Flo Air Intake Kit adds a welcomed increase in intake airflow for more power and throttle response. Superb engine accessory upgrades & mounts are also offered. The Dogbone Mount Insert Kit helps reduce wheel hop, while Short Shift Kits reduce throw length up to 40%.

Many VWs have logged significant miles to date, and most have road-weary suspension setups. KONI Struts and Shocks have been a favorite replacement choice for performance enthusiasts; they offer a perfect blend of even, more stable handling dynamics with ride compliance & comfort. KONI fine tunes their shocks & strut kits by application, refusing to take the 'one-size-fits-all' approach used by less thorough manufacturers. Available with Frequency Selective Damping (FSD) technology, KONI shocks & struts are a wise performance upgrade for your MKVI Jetta Sportwagen.

VWR has released an excellent Sport Spring Kit for the VW MKVI Golf/GTI. Racingline springs offer the handling and styling benefits of a stiffer, lower spring - the change, however, is a tasteful, subtle departure from the factory setup. Daily driving comfort is not compromised, lowering a subtle but instantly noticeable 1.2" - 1.4" Developed in Europe exclusively for your Volkswagen, Racingline Sport Springs are a smart, authentic VWR suspension upgrade.

The VWR RacingLine Cold Air Intake System is superior to typical aftermarket intakes because it utilizes the already effective factory cold-air routing, drawing air from outside the engine bay, avoiding power-robbing heat soak. Developed for use in Volkswagen Racing cars, the VWR system produces proven power gains throughout the entire rpm range. The larger diameter, fully-enclosed black anodized aluminum intake reduces airflow restriction, decreasing turbo spool time and enhancing overall turbo efficiency.

Neuspeed has been developing performance parts for European automobiles for decades, improving their catalog with each stellar release. Performance products for your MKV are now available through ECS tuning. The excellent Front Mount Intercooler flows more cool air to your intake manifold while the new P-Flo Air Intake Kit adds a welcomed increase in intake airflow for more power and throttle response. Superb engine accessory upgrades & mounts are also offered. The Dogbone Mount Insert Kit helps reduce wheel hop, while Underdrive Pullies decrease parasitic power loss.

Ready to blow off a little steam? Get Forge under your hood. Stock diverter valves just can't handle performance upgrades. Add a little boost and they get all weak in the knees and go to pieces. Forge knows this. That's why they've engineered boost-hardy diverter valves tough enough to take the pressure without blowing their lids. Aluminum housing. Faster Response. Works and plays well with engine management systems.

Automotive electrical work demands patience, knowledge, & above all else, the correct tools. European car owners oftentimes find themselves using ineffective, dangerous, & cumbersome methods when repairing or replacing wiring harness connectors. Schwaben's latest release, the European Car Electrical Terminal Tool Kit, gives enthusiasts the exact tools required for bullet connectors, common ABS sensor and power connectors, trailer light plugs, and more. Extend harness life, ensure proper diagnostic equipment connectivity, and preserve wiring harness life with this superb release.

The specialty tool experts at Schwaben have released a series of superbly engineered, exceptionally reliable car ramps, ramp extensions, wheel stands, & wheel chocks - now available from ECS tuning. The 30" to 67" Low Profile Car Ramps are specially made to accommodate vehicles with low bumper clearance - eliminating the risk of body damage & sliding ramps. Schwaben Wheel Stands feature a cradled wheel support for superior stability compared to jack stands, supporting up to 3000 lbs. And when lifting your vehicle or placing it on an incline, Wheel Chocks are a wise investment.

Lowering springs should do more than get your car closer to the ground. If you're considering your lowering options, be sure to include the premium quality spring sets available from ECS. Improve handling while keeping ride quality suitable for daily driving with Lowering Spring Kits from VW/Audi, Neuspeed, VWR, ST, and H&R. Regardless of your choice, buy with confidence, knowing you're getting quality springs with an unrivaled reputation for performance.

Neuspeed has been developing performance parts for European automobiles for decades, improving their catalog with each stellar release. Performance products for your GTI are now available through ECS tuning. The excellent Front Mount Intercooler flows more cool air to your intake manifold while the new P-Flo Air Intake Kit adds a welcomed increase in intake airflow for more power and throttle response. Superb engine accessory upgrades & mounts are also offered. The Dogbone Mount Insert Kit helps reduce wheel hop, while Underdrive Pullies decrease parasitic power loss.

When the 2.0T engine was introduced, the rubber diaphragm in the original diverter valve failed regularly, even at stock boost levels. The improved Pierburg diverter valve has a piston valve design that eliminates the original, failure-prone rubber diaphragm. This mechanical design is more durable and is an excellent upgrade for all stock or modified 2.0T FSI & TSI engines. Kits also include the highly convenient VAG Connector Removal Tool. Spend more time driving, less time fixing!