Forged alloy pistons - 83mm Bore (+.5mm overbore), 20mm wrist pins, 9.25:1 compression ratio
5X Entries For Our 25th Anniversary Sweepstakes!
Forged alloy pistons - 83mm Bore (+.5mm overbore), 20mm wrist pins, 9.25:1 compression ratio
5X Entries For Our 25th Anniversary Sweepstakes!
Includes rings, wrist pins, and pin locks - 82.5mm bore +.5mm overbore, 10.38:1 CR, 92.8mm stroke (stock)
Stock sized valve head diameter, factory triple groove keeper setup - Includes Supertech valves and IE valve seals
10X Entries For Our 25th Anniversary Sweepstakes!
*Existing factory triple-groove valve keepers are to be reused*
Includes rings, wire locks, and wrist pins - 81.5mm bore, 9:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Complete set includes 8 stainless intake valves, 8 inconel exhaust valves, and 32 single groove keepers
IE Street/Race Exhaust Camshaft for 400+ Horsepower Builds!
5X Entries For Our 25th Anniversary Sweepstakes!
Set of 4, Rifle drilled
5X Entries For Our 25th Anniversary Sweepstakes!
Engine code AWM require aftermarket pistons, Drop in for AEB & ATW engine code
Standard sized valve head diameter, factory triple groove keeper setup
*Valves priced individually - For 1.8T - qty 8 needed / For 2.7T - qty 12 needed - Please see long description for additional valve seal/keeper informati
IE Street/Race Intake Camshaft for 400+ Horsepower Builds!
5X Entries For Our 25th Anniversary Sweepstakes!
Stronger & smoother bearings, with less friction and improved oiling for your VW or Audi!
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
06-13-2026
Set of 4 connecting rods, to be paired with 21mm wrist pin aftermarket pistons (JE, Wiseco, Mahle ETC)
5X Entries For Our 25th Anniversary Sweepstakes!
To be used with aftermarket pistons with 21mm wrist pin only
Set of 4
5X Entries For Our 25th Anniversary Sweepstakes!
For use with factory pistons only
Set of 4
5X Entries For Our 25th Anniversary Sweepstakes!
Drop-In rods for use with OEM pistons, or pistons with 19mm wrist pins
Standard sized valve head diameter, factory triple groove keeper setup
*Valves priced individually - For 1.8T - qty 12 needed / For 2.7T - qty 18 needed - Please see long description for additional valve seal/keeper informa
82.5mm bore (standard), 9.1:1 compression ratio, 92.8mm stroke - Includes rings, wrist-pins, & circlips
Includes upper and lower bearing shells for a complete rod bearing replacement.