Includes upper and lower bearing shells for a complete rod bearing replacement.
Includes upper and lower bearing shells for a complete rod bearing replacement.
Stock sized valve head diameter, factory triple groove keeper setup - Includes Supertech valves and IE valve seals
10X Entries Into Our F80 M3 Sweepstakes
*Existing factory triple-groove valve keepers are to be reused*
Lighter, stiffer, and supports higher revving!
Call In Or Chat For Best Price!
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-15-2026
IE Race Intake Camshaft for 500+ Horsepower Builds!
Buy Integrated Engineering Software from 9/3/26 - 9/30/26 for a chance to win your Software for FREE!
Set of 4, rifle drilled
Buy Integrated Engineering Software from 9/3/26 - 9/30/26 for a chance to win your Software for FREE!
Drop-In rods for use with OEM pistons, or pistons with 19mm wrist pin
Takes 1.8L 06A engine to 2.0L (2008cc), by increasing the stroke and bore of the engine
Requires block machine work (+2mm overbore) - To be used in conjunction with IE 2.0L Stroker Crank (IESKVA6) and 144x20 connecting rods
Complete set of Ferrea high performance valve springs, and titanium retainers
Buy Integrated Engineering Software from 9/3/26 - 9/30/26 for a chance to win your Software for FREE!
Includes rings, wrist pins, and pin locks - 83mm bore +.5mm overbore, 9.04:1 CR, 92.8mm stroke (stock) 20mm wrist pin
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 82mm bore (1mm overbore), 9.25:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Rev higher and increase your RPMs safely!
Rev higher and increase your RPMs safely!
Valve springs and retainers are a MUST for high revving engines!
Includes rings, wire locks, and wrist pins - 82mm bore, 9:8 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 9:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*