Installation is very simple, can be performed in minutes, and is completely reversible.
Installation is very simple, can be performed in minutes, and is completely reversible.
50 Durometer rubber construction - Set of two mounts for left and right sides
Get up to +66 hp and +52 lb-ft through a safe and easy to use app-controlled tuning module from RaceChip
Extends farther down behind the grille to direct more air to the intake system
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
05-02-2026
Total solution for replacing and upgrading your notoriously weak stock engine mounts for your B8 / B8.5 Audi.
Gains from 79 AWHP/58 AWTQ on 91 octane up to 103 AWHP/76 AWTQ on 100 octane
Call In Or Chat For Best Price! 5X Entries For Our 25th Anniversary Sweepstakes!
This upgrade must be performed at ECS Tuning's facility in Ohio.
Vehicle must be brought to ECS Tuning for programming - *Fully loaded multi-program software available for pre-facelift models only (up to 2012 model year) *
Get up to +66 hp and +52 lb-ft through a safe and easy to use tuning module from RaceChip
Total solution for replacing and upgrading your notoriously weak stock engine mounts for your B8 / B8.5 Audi.
Total solution for replacing and upgrading your notoriously weak stock engine mounts for your B8 / B8.5 Audi.
Optimized pulley size for maximum performance.
Tune your car with just your laptop and choose gains ranging from 97-108 hp and 45-56 ft-lb of torque
Both B8 and B8.5 models are supported.
Süpercharge the performance of your B8/8.5 Audi S4/S5 with the 034Motorsport SuperDuper Charger 84mm Throttle Body System!
034Motorsport Dynamic+ Tuning stage 2+ is required to safely run this throttle body.
Features precision machined half-shells designed to perfectly clamp the supercharger pulley for easy removal
Increases the supercharger RPM throughout the full powerband, raising supercharger speed by 7%
5X Entries For Our 25th Anniversary Sweepstakes!
*Fits very late model years equipped with 4-bolt style supercharger pulleys - 3.0 TFSI Stage 2 Software is required in order for this pulley to yield a p
An essential upgrade for 3.0T Supercharged vehicles!
Gains of 15 hp and 11 ft-lbs of torque! Allows 34% more airflow over stock, with eye catching carbon fiber engine bay upgrade.
This product was last offered at the strikethrough price on
02-06-2026