For use with a factory throttle body inlet.
For use with a factory throttle body inlet.
Replacement air filter for APR Carbonio intake systems
Call In Or Chat For Best Price! 5X Entries For Our 25th Anniversary Sweepstakes!
CARB certified for sale in all 50 states
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
07-23-2026
Unleash hidden power by reducing rotating mass
Designed for drag or drift cars that see limited street use. Conservatively rated at 500ft/lbs.
Designed for drag or drift cars that see limited street use. Conservatively rated at 500ft/lbs.
Significantly reduces intake air temperatures - Core size increased From 148 sq. in. to 341 sq. in, and frontal area increased by 130% over stock cooler!
*Please Note: Vehicles equipped with a factory dynamic steering cooler must relocate - Please see description for more info*
Fits B8.5 2013+
Spin the supercharger faster without affecting the accessory drive system
10X Entries For Our 25th Anniversary Sweepstakes!
Appropriate stage 2 software is required for use
Great for when more fuel is needed in a custom fueling application
Average gain of 131 horsepower and 136 lb-ft of torque on 91 Octane
5X Entries For Our 25th Anniversary Sweepstakes!
Perform tune in minutes from the comfort of your own driveway! Only available for purchase in the United States and Canada.
Designed for track use while still streetable. Conservatively rated at 430ft/lbs.
Designed for high performance naturally aspirated and forced induction EFI vehicles - It can be installed externally or in-tank using optional hardware that is sold separately
This is a general-use high flow fuel pump, not a direct plug-and-play swap in most application
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
07-23-2026
Ease the 3.0T supercharger pulley removal/installation process with this install kit
5X Entries For Our 25th Anniversary Sweepstakes!
Decreases the diameter of the factory pulley from ~63.25mm to ~57.75mm, which in turn spins the supercharger ~9.5% faster.
Call In Or Chat For Best Price! 5X Entries For Our 25th Anniversary Sweepstakes!
- APR Stage II software is required to run any upgraded Pulley configuration and is sold separately - Ple
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
07-23-2026
Upgrade to the ultimate pulley setup!
Replaces the stock heat exchanger pump and out-performs it with a 100% gain in flow-rate over the factory pump.
For vehicles up through the 2012 model year only. (Pre-Facelift). Requires the AWE ColdFrontâ„¢ Reservoir for proper fitment.
Eliminate the loose or sloppy feeling from your shifter and drivetrain!
Don't See A Bundle You Want - Give Us A Call Or Chat - We Will Make One!
This product was last offered at the strikethrough price on
05-05-2026