Set of 6
Set of 6
Set of 4
For vehicles FSI engines only - For use with factory pistons
Set of 4
Set of 4 connecting rods, to be paired with 21mm wrist pin aftermarket pistons (JE, Wiseco, Mahle ETC)
Fits models with EA888 Gen2 engine (Up to 2015) and for use with aftermarket pistons with 21mm wrist pin only.
Stronger & smoother bearings, with less friction and improved oiling for your VW or Audi!
10X Entries Into Our F80 M3 Sweepstakes
This product was last offered at the strikethrough price on
06-13-2026
Forged alloy pistons - 83mm Bore (+.5mm overbore), 20mm wrist pins, 9.25:1 compression ratio
Real Deal Calico Coated Rod Bearings - Full set for 5 rods, standard clearance
82.5mm bore (standard), 9.1:1 compression ratio, 92.8mm stroke - Includes rings, wrist-pins, & circlips
For vehicles with FSI engines only
Includes upper and lower bearing shells for a complete rod bearing replacement.
This product was last offered at the strikethrough price on
10-07-2026
Set of 4, rifle drilled
Includes JE Pro Seal rings, 22mm wrist pins, and pin locks - 83mm bore (+.5mm overbore) and 9.5:1 CR
83mm bore (+.5mm overbore)
Includes JE Pro Seal rings, 22mm wrist pins, and pin locks - 82.5mm bore (stock) and 9.5:1 CR
82.5mm bore (stock)
Takes 1.8L 06A engine to 2.0L (2008cc), by increasing the stroke and bore of the engine
Requires block machine work (+2mm overbore) - To be used in conjunction with IE 2.0L Stroker Crank (IESKVA6) and 144x20 connecting rods
Clearance OE spec oil.
Fits lower portions of the connecting rod with yellow markings
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
11-03-2026
24% greater load capacity and 17% more fatigue resistance