ECS News

If an ounce of prevention is worth a pound of cure, imagine what 224 ounces of BMW synthetic oil can do for your engine. Keep your Bavarian motorcar running like a fine timepiece with regular oil change services, and head off costly cures caused by neglected maintenance. Our service kits are conveniently packaged to include seven quarts of OEM synthetic motor oil and a fresh filter cartridge, plus seals and gaskets. For added protection, ECS added a magnetic drain plug that attracts and holds ferrous particles so they don't abrade close tolerance engine parts.

Take a second to check out the impressive E36 3 series Shifter Components available from ECS. Whether you're concerned with improving shifting performance or hoping to bring a fresh design element to your interior, it's highly likely you'll find the perfect addition in our catalog. Ultra-rare ZHP, M-Technic, and genuine BMW Performance parts can be found amongst OEM and ECS Shifter Rebuild Kits and Shift Boot replacements. Automatic transmissions are served as well, with a selection of aftermarket and OEM Gear Selectors.

Make your Z4 go where you aim it. ECS has the kits you need to repair or restore your Z4 suspension and steering. As in everything! Whether your car is suffering from battered ball joints, bashed bushings, or tired tie rod ends, we'll help you rein it in and head it in the right direction again. We have big kits and small; OEM and name brand aftermarket, packaged and priced for every budget.

In order to maintain peak engine performance and ensure engine longevity, regulating proper operating temperatures is imperative. Instead of waiting for cooling issues to erode your car's performance and damage expensive parts, replace your water pump preemptively, saving unnecessary time and expense. ECS offers OEM BMW and aftermarket Water Pumps. Each option features a metal impeller, and includes an alignment dowel and sealing gasket. Commonly replaced at around 60k miles, this critical engine component is a wise investment for any E46 M3 owner.

The best way to address your accessory belt, tensioners, and idler pulley is to invest in a complete kit with new replacement hardware. ECS assembled and genuine OEM Accessory Belt Service Kits contain each part required to completely rebuild your accessory system. Kit Includes: Accessory Belt Belt Tensioner Assembly Deflection Pulley

*Increases power and efficiency while decreasing combustion temperatures. *Allows you to run higher boost pressure on pump gas. *Pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. *This AEM kit has more features and components than any other comparably priced injection kits on the market.

Whenever pushing your car past the factory-designated limits of operation, whether it be through hard driving or performance modifications, adequate engine cooling should always be a high concern. In fact, improving performance by increasing engine work is only possible when engine temperatures are kept within a reasonable range. The Mishimoto Performance Radiator is capable of a 35% increase in cooling capacity due to a fully-brazed, two-row aluminum core that's 25% thicker than stock. The direct-fit radiator also uses CNC-machined quick-disconnect fittings for perfect fitment.

Whenever pushing your car past the factory-designated limits of operation, whether it be through hard driving or performance modifications, adequate engine cooling should always be a high concern. In fact, improving performance by increasing engine work is only possible when engine temperatures are kept within a reasonable range. The Mishimoto Performance Radiator is capable of a 35% increase in cooling capacity due to a fully-brazed, two-row aluminum core that's 25% thicker than stock. The direct-fit radiator also uses CNC-machined quick-disconnect fittings for perfect fitment.

Want to do something bold? Bodacious, even? Check out this line of 3M Scotchprint films. Add texture and style to interior and exterior surfaces by applying these durable adhesive backed films to body panels or trim. Want variety? Channel Darth Vader with gloss black or carbon fiber, or go sci-fi-starship with brushed aluminum or titanium. Buy rolls five feet wide in lengths from one to 20 feet. Hi-tech look. Low tech installation. User friendly and easy to apply using simple tools, 3M 1080 film lets anyone get professional results on the first try.

The factory springs on your E82 were designed to exacting standards by some of the world's most talented engineers. Replacing this component requires careful consideration - especially if you're concerned with making a lasting improvement to your vehicle. H&R has a German pedigree and engineering reputation that befits the E82. Improve handling but keep ride quality suitable for a daily driver with Sport springs or take the gloves off and install no nonsense Super Sport springs

Whenever pushing your car past the factory-designated limits of operation, whether it be through hard driving or performance modifications, adequate engine cooling should always be a high concern. In fact, improving performance by increasing engine work is only possible when engine temperatures are kept within a reasonable range. The Mishimoto Performance Radiator is capable of a 35% increase in cooling capacity due to a fully-brazed, two-row aluminum core that's 25% thicker than stock. The direct-fit radiator also uses CNC-machined quick-disconnect fittings for perfect fitment.

One of the obvious benefits to owning a turbocharged car is the ability to realize significant power gains simply by altering boost pressure. AFE has gained a deep understanding of airflow engineering through their experience manufacturing premium air filter elements and air intake systems. Their latest release, the Scorcher Power Module for the BMW F30 335i, is the ultimate expression of the company's mastery of air induction science. Using clever alterations in boost pressure sensor inputs and outputs, the resultant PSI increase adds a reliable 40hp and 80lb/ft torque.

ECS now offers a range of excellent Cup Suspension kits for the E46 3 series. Sport Cup Kits contain shocks that are matched to a spring set, ensuring that spring rates and ride height are appropriate for the specific damping characteristics. H&R Sport and Touring Cup Suspension kits are available, lowering an average of 1.3 inches at the front and 1.2 inches at the rear. ECS-assembled Cup Kits featuring Koni Yellow or SRT.T offer stiffer damping and higher spring rates, while the FSD Koni/Eibach kit offers a more race-ready ride with 1.4" front and 1.4" rear average lowering.

You didn't buy a BMW because of the logo on the hood and trunk - though, admittedly, a brand-new clean BMW roundel does refresh your car's appearance like nothing else. ECS offers genuine OEM Trunk and Hood Roundel Emblems, complete with installation grommets for an easy snap-in installation. Replacement is made infinitely more easy using the clever ECS BMW Roundel Removal Tool, sliding underneath your worn emblem for leverage when pulling the old unit off of the hood or trunk.

Throughout the project of upgrading or replacing factory coilovers, rusted & seized bolts will be damaged during suspension removal, while strut mounts & reinforcement plates will be found corroded, worn & of no use. The wisest approach when attempting the project is to invest in a thorough Cup Kit/Coilover Installation Kit - The ECS Kit includes OEM BMW rear shock mount bolts, camber correction bolt, hex bolt w/ washer, & self locking nut, pad wear sensor bracket, self locking hex nut, ECS rear reinforcement plate, Elring shock mount gasket, & Vaico upper and rear strut mounts.

You didn't buy a BMW because of the logo on the hood and trunk - though, admittedly, a brand-new clean BMW roundel does refresh your car's appearance like nothing else. ECS offers genuine OEM Trunk and Hood Roundel Emblems, complete with installation grommets for an easy snap-in installation. Replacement is made infinitely more easy using the clever ECS BMW Roundel Removal Tool, sliding underneath your worn emblem for leverage when pulling the old unit off of the hood or trunk.

Control over camber and caster is critical to achieving the perfect stance and handling characteristics. Whenever your ride height is lowered, the new geometry specified by the control arms introduces negative camber and caster, compromising your tire's contact patch and altering wheel fitment. SPC Front and Rear Adjustable Camber Plates and Bushings give the discerning E39 M5 owner the control over suspension dynamics that makes a good handling car great. With a wide range of caster and camber adjustability, a new-found level of handling tunability is a welcomed addition.

Whenever pushing your car past the factory-designated limits of operation, whether it be through hard driving or performance modifications, adequate engine cooling should always be a high concern. In fact, improving performance by increasing engine work is only possible when engine temperatures are kept within a reasonable range. The Mishimoto Performance Radiator is capable of a 35% increase in cooling capacity due to a fully-brazed, two-row aluminum core that's 25% thicker than stock. The direct-fit radiator also uses CNC-machined quick-disconnect fittings for perfect fitment.

Whenever pushing your car past the factory-designated limits of operation, whether it be through hard driving or performance modifications, adequate engine cooling should always be a high concern. In fact, improving performance by increasing engine work is only possible when engine temperatures are kept within a reasonable range. The Mishimoto Performance Radiator is capable of a 35% increase in cooling capacity due to a fully-brazed, two-row aluminum core that's 25% thicker than stock. The direct-fit radiator also uses CNC-machined quick-disconnect fittings for perfect fitment.

You didn't buy a BMW because of the logo on the hood and trunk - though, admittedly, a brand-new clean BMW roundel does refresh your car's appearance like nothing else. ECS offers genuine OEM Trunk and Hood Roundel Emblems, complete with installation grommets for an easy snap-in installation. Replacement is made infinitely more easy using the clever ECS BMW Roundel Removal Tool, sliding underneath your worn emblem for leverage when pulling the old unit off of the hood or trunk.

The MediaBridge takes the hassle and aggravation out of playing your favorite audio source through your BMW's sound system. The DICE Media Bridge module turns your car stereo into a master control for USB storage drives, IPhone, iPod, or any audio device that can be plugged into the standard audio port

You didn't buy a BMW because of the logo on the hood and trunk - though, admittedly, a brand-new clean BMW roundel does refresh your car's appearance like nothing else. ECS offers genuine OEM Trunk and Hood Roundel Emblems, complete with installation grommets for an easy snap-in installation. Replacement is made infinitely more easy using the clever ECS BMW Roundel Removal Tool, sliding underneath your worn emblem for leverage when pulling the old unit off of the hood or trunk.

Left unserviced, automatic transmission fluid breaks down chemically and degrades, causing the valve body and filter to become contaminated with deposits and sludge. These conditions lead to poor shifting and, ultimately, transmission failure. The Stage I ECS Transmission Service Kit includes a new drain plug with sealing washer, a fill plug with sealing washer, and Redline D4 automatic transmission fluid. The more comprehensive Stage II kit adds an automatic transmission filter with hardware and a new oil pan gasket.

Lowering springs should do more than get your car closer to the ground. If you're considering your lowering options, be sure to include the premium quality spring sets from H&R. Improve handling but keep ride quality suitable for a daily driver with Sport Springs, available in "low" and "lower." Or take the gloves off and install no nonsense H&R Race springs for track-ready performance. Regardless of your choice, buy with confidence knowing you're getting German-made springs with an unrivaled reputation for quality and performance.

The N54 straight-six engine has earned several awards for engineering excellence; partly through novel turbocharging and advanced variable valve timing, but crucially, through second-generation piezo direct injection. This fuel injection technology relies upon the expansion of crystalline materials under the influence of electricity to inject fuel to exceedingly close specifications for superior control over spray characteristics. ECS assembled and genuine OEM Injector Replacement Kits restore your engine's brilliance by taking care of the entire system in one servicing.

The M3 comes with an excellent handling package, but there's always room for improvement. Let H&R up your game with adjustable sway bars that pick up where BMW left off. Made in Germany, H&R sport springs, sway bars, and adjustable coilovers are built on decades of experience designing world class suspension upgrades; then manufactured to old world standards where "excellence" is more than just a word.

You didn't buy a BMW because of the logo on the hood and trunk - though, admittedly, a brand-new clean BMW roundel does refresh your car's appearance like nothing else. ECS offers genuine OEM Trunk and Hood Roundel Emblems, complete with installation grommets for an easy snap-in installation. Replacement is made infinitely more easy using the clever ECS BMW Roundel Removal Tool, sliding underneath your worn emblem for leverage when pulling the old unit off of the hood or trunk.

You didn't buy a BMW because of the logo on the hood and trunk - though, admittedly, a brand-new clean BMW roundel does refresh your car's appearance like nothing else. ECS offers genuine OEM Trunk and Hood Roundel Emblems, complete with installation grommets for an easy snap-in installation. Replacement is made infinitely more easy using the clever ECS BMW Roundel Removal Tool, sliding underneath your worn emblem for leverage when pulling the old unit off of the hood or trunk.

UUC Rear Control Arms for the E83 X3 are an excellent way to add an element of adjustability to your suspension. The control arms allow for the fine adjustment of camber, allowing you to tune handling characteristics or better align the wheel face with the profile of your vehicle for aesthetic purposes. The 4130 Chromoly center bar, CNC machined billet aluminum end components, and High durometer, sqeak-free inboard bushing add longevity and practicality to this smart suspension upgrade.

You didn't buy an E9X 3 series because of the logo on the hood and trunk - though, admittedly, a brand-new clean BMW roundel does refresh your car's appearance like nothing else. ECS offers genuine OEM Trunk and Hood Roundel Emblems, complete with installation grommets for an easy snap-in installation. Replacement is made infinitely more easy using the clever ECS BMW Roundel Removal Tool, sliding underneath your worn emblem for leverage when pulling the old unit off of the hood or trunk.