ECS News

If you have power-adding modifications on your MKIV Golf/Jetta or New Beetle, the next upgrade is more stopping power. The ECS Tuning 302mm two-piece Tru-Float rotors increase swept area and braking torque without weight penalty. Precision-machined caliper carrier brackets space out your stock brake calipers to match the new rotor, and ECS Exact-Fit brake lines provide pad-squeezing fluid pressure. Designed as a compliment to your ECS Tuning Front Big Brake Kit, this Stage 1 direct-fit kit helps you keep your speed in check.

Clean up the lines on the front of your MKIV Jetta/GLI with his one-piece, molded ABS grille from FK. An OE-quality, direct-fit part, this grille makes it easy a more aggressive and ambiguous look. Installation is easy, using stock hardware and simple hand tools. A clean, four-bar grille will make all the difference in your MKIV's appearance.

If you spend time and money renewing your brake hardware and linings, you ought to consider upgrading to ECS Tuning Exact-Fit brake hoses, and do the job right. These premium brake hoses are engineered to be stronger, more durable, and better protected than the originals. They are shielded in stainless steel mesh reinforcement, and coated with bright red vinyl for added protection. Available by the axle for front or rear, or as a complete vehicle set, our DOT-approved, tailored hoses fit like OE for hassle-free installation.

Not blessed with OE fog lights? ECS makes it easy to wire the fog lights of your new E-Code or GLX headlights. This harness takes the guesswork out of wiring an OE-quality installation. Pre-crimped connectors plug directly into the factory switch and light harness; no spliced or tapped wires and no special tools required. All bare connections are weather proofed with shrink tubing. Kit works on all MKIV Jettas and Golfs not originally equipped with OE fog lights. Harness can also be used to install auxillary fogs.

The ECS Tuning Billet oil filter cap for your Porsche 997 is an attractive, durable upgrade designed to prevent dangerous and unsightly oil leaks. This machined and anodized aluminum housing is an exact-fit replacement for the original. * Uses the OE sealing ring * Features a 19mm hex-head * Made in the USA

Sharpened handling. Increased agility. Tactile responsiveness. A feeling of being one with car and road. Replacing stock bushings with Powerflex polyurethane components will deliver all that and more. ECS is proud to present the Powerflex brand of performance bushings. Powerflex is a world-renowned name in high-performance products, and they manufacture an array of quality suspension and chassis components. From subframe mounts to control arm and sway bar bushings and more, nothing overpowers the Powerflex catalog and their reputation for durability and quality.

Sharpened handling. Increased agility. Tactile responsiveness. A feeling of being one with car and road. Replacing stock bushings with Powerflex polyurethane components will deliver all that and more. ECS is proud to present the Powerflex brand of performance bushings. Powerflex is a world-renowned name in high-performance products, and they manufacture an array of quality suspension and chassis components. From subframe mounts to control arm and sway bar bushings and more, nothing overpowers the Powerflex catalog and their reputation for durability and quality.

Sharpened handling. Increased agility. Tactile responsiveness. A feeling of being one with car and road. Replacing stock bushings with Powerflex polyurethane components will deliver all that and more. ECS is proud to present the Powerflex brand of performance bushings. Powerflex is a world-renowned name in high-performance products, and they manufacture an array of quality suspension and chassis components. From subframe mounts to control arm and sway bar bushings and more, nothing overpowers the Powerflex catalog and their reputation for durability and quality.

Sharpened handling. Increased agility. Tactile responsiveness. A feeling of being one with car and road. Replacing stock bushings with Powerflex polyurethane components will deliver all that and more. ECS is proud to present the Powerflex brand of performance bushings. Powerflex is a world-renowned name in high-performance products, and they manufacture an array of quality suspension and chassis components. From subframe mounts to control arm and sway bar bushings and more, nothing overpowers the Powerflex catalog and their reputation for durability and quality.

Sharpened handling. Increased agility. Tactile responsiveness. A feeling of being one with car and road. Replacing stock bushings with Powerflex polyurethane components will deliver all that and more. ECS is proud to present the Powerflex brand of performance bushings. Powerflex is a world-renowned name in high-performance products, and they manufacture an array of quality suspension and chassis components. From subframe mounts to control arm and sway bar bushings and more, nothing overpowers the Powerflex catalog and their reputation for durability and quality.

Sharpened handling. Increased agility. Tactile responsiveness. A feeling of being one with car and road. Replacing stock bushings with Powerflex polyurethane components will deliver all that and more. ECS is proud to present the Powerflex brand of performance bushings. Powerflex is a world-renowned name in high-performance products, and they manufacture an array of quality suspension and chassis components. From subframe mounts to control arm and sway bar bushings and more, nothing overpowers the Powerflex catalog and their reputation for durability and quality.

Sharpened handling. Increased agility. Tactile responsiveness. A feeling of being one with car and road. Replacing stock bushings with Powerflex polyurethane components will deliver all that and more. ECS is proud to present the Powerflex brand of performance bushings. Powerflex is a world-renowned name in high-performance products, and they manufacture an array of quality suspension and chassis components. From subframe mounts to control arm and sway bar bushings and more, nothing overpowers the Powerflex catalog and their reputation for durability and quality.

Sharpened handling. Increased agility. Tactile responsiveness. A feeling of being one with car and road. Replacing stock bushings with Powerflex polyurethane components will deliver all that and more. ECS is proud to present the Powerflex brand of performance bushings. Powerflex is a world-renowned name in high-performance products, and they manufacture an array of quality suspension and chassis components. From subframe mounts to control arm and sway bar bushings and more, nothing overpowers the Powerflex catalog and their reputation for durability and quality.

A traditional design focal point on German sedans is at the rear valance - the part oftentimes distinguishes performance-oriented models from more pedestrian versions. The late model MKIV Jetta 2.0L received an updated rear valance to accommodate dual exhaust tips, giving the car enhanced street presence and individuality. If your rear valance is faded or cracked, or if you fancy the updated late-model appearance, ECS now offers the genuine VW/Audi 2002+ valance for all model year MKIV Jettas. And because the part is genuine VW/Audi, fitment and quality are guaranteed.

By providing it all for you in a single click, ECS has made it easier than ever to get the quality replacement matching components you need when beginning a brake service. Our brake service kit includes rotors, pads, sensors, assembly grease, and even a full complement of set screws to make your brake replacement easy. Everything you need to perform a professional quality brake service, you can find at ECS Tuning.

Have your eyes on the perfect set of wheels for your 5x100 bolt-pattern AUDI MKI TT, only to realize they won't bolt up? ECS Tuning bolt-on wheel adapter kits open up an entire new world of wheel styles and fitments. Precision machined from heat-treated aluminum with threaded steel inserts, these hubcentric adapters bolt to your 5x100 57.1mm wheel hub, effectively making it a 5x112 hub. These durable, anodized adapters come in a kit with all the required hardware. Bolt them on and get exactly the set of wheels your stock bolt pattern has been denying you.

We're excited; and with good reason. ECS Tuning proudly introduces our new line of premium, corrosion-resistant rotors: GEOMET®. GEOMET® is a special coating containing metal oxides, zinc, and aluminum flakes, sprayed over the entire rotor surface to ensure complete coverage, and baked on at 600 degrees to form a durable and attractive silver-gray finish that fights rust far better than paints or other conventional coatings. Slotted or drilled and slotted, you can expect your new GEOMET® rotors to outperform and outlast stock rotors, and look great behind your alloy wheels.

These pedals are a great, yet simple, upgrade to give your vehicle that more "sporty" look. A factory option on the S4/S5, this aluminum look brake, throttle and dead pedal set can be swapped out with relative ease. Fits automatic transmission vehicles only. Get out of your car with style These interior door handles are a perfect example, with their sleek brushed aluminum finish and split design. They also carry over the back light design so you are able to keep that feature as well.

This FlipTop Center Armrest Console, available on European MINI models, is a bolt-on option that increases the functionality and comfort of your driving position. An interior storage compartment and a rear hinge that lets you to flip it out of the way increase the useability of your MINI's cabin. And the supple leather-trimmed top gives your arm a respite from steering and shifting. This armrest is a Genuine MINI product, so fit and finish are superb. Installs easily using simple hand tools. Get one and motor on in comfort!

Know everything that is happening around you while you're on the road. ECS Tuning brings you these driver's side Blind Spot Convex Mirrors to see what your stock units could not. Replacing only the mirror glass, installation is simple. The whole mirror glass is convex (slight curve) to give you more viewing area. Gives a great factory appearance without any obstructions like normal stick-on blind spot mirrors. Because they are Genuine MINI parts, you are assured of quality and fitment. Plug-and-play for your MINI. Get them, and get safe!

Even a new car could use a new look. If you don't want the the intensity of black or the brightness of chrome, these gray headlight and taillight trim rings will fit the bill nicely. Made of ABS plastic with an attractive anthracite gray finish, these Genuine MINI trim rings clip right on to the light housings. A quick and easy upgrade with factory fit and finish. This is a set of left and right trim rings for both the headlights and taillights of your R60 MINI Countryman.

Step right up. Get your colorific candy colored key covers right here at ECS Tuning. Soft touch covers in many brilliant colors protect your remote key fob, and make it easy to spot your keys in the pile on the hallway key rack. Sized for an exact fit, these new molded covers snap in place in seconds.

The symptoms are annoying. The costs can be painful. DISA valves control intake manifold runner length to improve engine performance at different rpm. When they fail, the DISA valve bangs around in its housing, making a rattling noise accompanied by rough idle and off-idle hesitation. If your BMW experiences these symptoms, don't wait to fix it. In some cases, parts of the DISA--including a metal spreader pin--can be sucked into your engine, causing serious engine damage. Easy to replace, your new DISA screws to the side of the intake and comes with pre-installed sealing gasket.

Prevent bent frame rail pinch welds and future corrosion complications with a set of RS4 jack pads. No more metal-to-metal contact! These Genuine VW/Audi pads install snugly over the frame rails in the OEM jacking point locations, providing a flat surface from which you can confidently lift your car. *This kit does require a slight modification to the frame rail to permanently mount the jack pads. All nutserts and mounting hardware are included.

Alzor 881 wheels have the look and feel of an instant favorite. With their bold arched split-spoke design and eye-catching hyper silver finish with polished lip, this wheel set is just the finishing touch you've been looking for. Combine their muscular 18 x 8.5 or 9.5 physique with your newly lowered suspension and watch it all come together in an overall styling statement that's sure to turn heads. Available in different offsets, your set comes complete with hubcentric rings. When you see how much they won't cost you, the choice is a four-gone conclusion.

Alzor 881 wheels have the look and feel of an instant favorite. With their bold arched split-spoke design and eye-catching hyper silver finish with polished lip, this wheel set is just the finishing touch you've been looking for. Combine their muscular 18 x 8.5 or 9.5 physique with your newly lowered suspension and watch it all come together in an overall styling statement that's sure to turn heads. Available in different offsets, your set comes complete with hubcentric rings. When you see how much they won't cost you, the choice is a four-gone conclusion.

Have your eyes on the perfect set of wheels for your 5x100 bolt-pattern Volkswagen, only to realize they won't bolt up? ECS Tuning bolt-on wheel adapter kits open up an entire new world of wheel styles and fitments. Precision machined from heat-treated aluminum with threaded steel inserts, these hubcentric adapters bolt to your 5x100 57.1mm wheel hub, effectively making it a 5x112 hub. These durable, anodized adapters come in a kit with all the required hardware. Bolt them on and get exactly the set of wheels your stock bolt pattern has been denying you.

We're excited; and with good reason. ECS Tuning proudly introduces our new line of premium, corrosion-resistant rotors: GEOMET®. GEOMET® is a special coating containing metal oxides, zinc, and aluminum flakes, sprayed over the entire rotor surface to ensure complete coverage, and baked on at 600 degrees to form a durable and attractive silver-gray finish that fights rust far better than paints or other conventional coatings. Slotted or drilled and slotted, you can expect your new GEOMET® rotors to outperform and outlast stock rotors, and look great behind your alloy wheels.

More traffic means more traffic accidents. But because we know you aren't going to stay home to avoid the risk, we offer these mirrors to improve visibility and safety. These mirrors are a double threat. Aspherical for increased blind spot visibility, and heated to avoid icing or fogging. Because they are Genuine MINI parts, you are assured of quality and fitment. Plug-and-play for your MINI. Get them, and get safe!

We're excited; and with good reason. ECS Tuning proudly introduces our new line of premium, corrosion-resistant rotors: GEOMET. GEOMET is a special coating containing metal oxides, zinc, and aluminum flakes, sprayed over the entire rotor surface to ensure complete coverage, and baked on at 600 degrees to form a durable and attractive silver-gray finish that fights rust far better than paints or other conventional coatings. You can expect your new GEOMET rotors to outperform and outlast stock rotors, and look great behind your alloy wheels.