Forged Alloy pistons with 22mm wrist pin - Varying Comp Ratio: (2.0T TSI EA888 Gen 1 & 2 (2008-2014): 9.5:1 CR), (2.0T TSI EA888 Gen 3 (2015+): 9.3:1 CR)
For vehicles with TSI engine only
Forged Alloy pistons with 22mm wrist pin - Varying Comp Ratio: (2.0T TSI EA888 Gen 1 & 2 (2008-2014): 9.5:1 CR), (2.0T TSI EA888 Gen 3 (2015+): 9.3:1 CR)
For vehicles with TSI engine only
Forged Alloy pistons with 22mm wrist pin with +.5mm overbore
Must bore and hone the block to exact specification to ensure the best results
High quality performance valve springs and titanium retainers
144x20mm forged H-beam rods from Integrated Engineering.
*To be used with aftermarket pistons with 20mm wrist pins*
The highest quality race bearings available.
Not for use with stock rods
Aftermarket performance intake and exhaust valve springs and retainers for your high revving FSI.
For vehicles with FSI engines only
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
10-07-2026
144x22 I beam connecting rods to be used with aftermarket pistons with 22mm wrist pins - Set of Five
Powerful Reliability for the street or track! Includes rings, wire locks, and wrist pins - 82.5mm bore, 9.3:1 CR, 22mm wrist pins (for use with IE rods)
*Requires aftermarket connecting rods with a non-tapered 22mm small end*
Includes upper and lower bearing shells for a complete main bearing replacement. .001 Oil Clearance.
For vehicles with TSI engines only
Complete set includes 8 stainless intake valves, 8 inconel exhaust valves, and 32 single groove keepers
Forged alloy pistons - 82.5mm Bore (stock), 20mm wrist pins, 9.0:1 compression ratio
For vehicles with FSI engines only
High quality performance valve spings and titanium retainers
Stock sized valve head diameter, factory triple groove keeper setup - Includes Supertech valves and IE valve seals
10X Entries Into Our F80 M3 Sweepstakes
*Existing factory triple-groove valve keepers are to be reused*
Designed to withstand up to 1100hp!
This product was last offered at the strikethrough price on
10-01-2026
144x20mm forged H-beam rods from Integrated Engineering.
*To be used with aftermarket pistons with 20mm wrist pins*
Includes upper and lower bearing shells for a complete rod bearing replacement.