Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 82mm bore (1mm overbore), 9.25:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Rev higher and increase your RPMs safely!
Rev higher and increase your RPMs safely!
For vehicles with FSI engines only
Valve springs and retainers are a MUST for high revving engines!
Set of 6
Includes rings, wire locks, and wrist pins - 82mm bore, 9:8 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 9:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Increase bottom-end reliability when adding horsepower
This matched high-performance camshaft set features aggressive profiles and pre-set centerlines to optimize valvetrain sequencing for 400+ HP turbocharged engines.
IE Street Intake Camshaft for 300+ Horsepower Builds!
Keep your engine block from flexing under torque
+1mm oversized valve head diameter, single groove keeper setup for high RPM use - Includes Supertech valves, single groove keepers and IE valve seals
10X Entries Into Our F80 M3 Sweepstakes
*Oversized valves require extra machine work to the cylinder head.*
Stock sized valve head diameter, single groove keeper setup for high RPM use
*Valves priced individually - For 1.8T - qty 12 needed / For 2.7T - qty 18 needed - Please see long description for additional valve seal/keeper informa
Stock sized valve head diameter, single groove keeper setup for high RPM use - Includes Supertech valves, single groove keepers and IE valve seals
10X Entries Into Our F80 M3 Sweepstakes