Set of 4
For vehicles with FSI engines only. For use with factory pistons only.
Set of 4
For vehicles with FSI engines only. For use with factory pistons only.
Set of 4
Set of 4 connecting rods, to be paired with 21mm wrist pin aftermarket pistons (JE, Wiseco, Mahle ETC)
To be used with aftermarket pistons with 21mm wrist pin only
Stronger & smoother bearings, with less friction and improved oiling for your VW or Audi!
10X Entries Into Our F80 M3 Sweepstakes
This product was last offered at the strikethrough price on
06-13-2026
Forged alloy pistons - 83mm Bore (+.5mm overbore), 20mm wrist pins, 9.25:1 compression ratio
For vehicles with FSI engines only
82.5mm bore (standard), 9.1:1 compression ratio, 92.8mm stroke - Includes rings, wrist-pins, & circlips
Includes upper and lower bearing shells for a complete rod bearing replacement.
This product was last offered at the strikethrough price on
10-07-2026
Set of 4, rifle drilled
Takes 1.8L 06A engine to 2.0L (2008cc), by increasing the stroke and bore of the engine
Requires block machine work (+2mm overbore) - To be used in conjunction with IE 2.0L Stroker Crank (IESKVA6) and 144x20 connecting rods
piston set with the strength to withstand high power numbers
Requires 2mm overbore
Billet main caps for your high horsepower extreme build
Set of 6
Includes rings, wrist pins, and pin locks - 83mm bore +.5mm overbore, 9.04:1 CR, 92.8mm stroke (stock) 20mm wrist pin
Set of 6
Increase bottom-end reliability when adding horsepower
Stock fitment while being able to handle higher boost applications
FITS FACTORY PISTONS WITH 20MM WRIST PINS ONLY
This product was last offered at the strikethrough price on
09-29-2026