ECS News

A broken timing belt does more than leave you in tennis shoe mode; it causes extensive and expensive engine damage when piston heads contact the valves and mangle the head. Don't wait for disaster to strike. Check out our wide assortment of timing belt kits. We have you covered: from standard belt-tensioner combos to ultimate kits with water pump, thermostat, accessory belts, bolts, and seals. Looking for some extra performance? We offer complete kits including Gates Racing belts, underdrive pulleys, and lightweight crank pulleys. ECS: We have what you need to get it done.

Have you noticed automatic transmission fluid leaking underneath your car? The cause may be a failed wiring harness spacer, sometimes called the pilot bushing. This part is a common failure item on Mercedes-Benz models with the 722.6 automatic transmission, and once it starts leaking, it must be replaced to prevent transmission fluid from continuing to leak, eventually reaching the transmission control module, causing even more damage. ECS Tuning offers this brand new pilot bushing kit, complete with new o-rings, dipstick tube cap lock pin and a quart of fluid, to make it easy.

If you spend time and money renewing your brake hardware and linings, you ought to consider upgrading to ECS Tuning Exact-Fit brake hoses, and do the job right. These premium brake hoses are stronger, more durable, and better protected than the originals. They are shielded in stainless steel mesh reinforcement, and coated with bright red vinyl for added protection. Available by the axle for front or rear, or as a complete vehicle set, our DOT-approved tailored hoses come with OE attachment fittings and sealing washers.

Precision crafted using 100% T-304 stainless steel and mandrel bending, this 335i TT Sport exhaust system is the more aggressive of the two offered by B&B and not for the weak of heart. By using the factory mounting locations for an easy installation this system requires a single cut of the factory system on each side for removal, and all the necessary mounting hardware is included.

A broken timing belt does more than leave you in tennis shoe mode; it causes extensive expensive engine damage when piston heads mangle valves. Don't wait for disaster to strike. Check our assortment of timing belts and belt kits. We have you covered: from basic belt-tensioner combos to Ultra kits with water pump, thermostat, accessory belts, bolts, and seals. Performance enthusiasts! Add some fun. Order stock kits spiced with underweight or underdrive crank pulleys. ECS: we have what you need to get it done.

To keep your driving machine in top shape, regular maintenance is imperative. BMW recommends the Inspection II at 40,000 miles & at each 40,000 miles thereafter. Doing all of the necessary inspections will keep your vehicle running much longer and cleaner. However, if you're out of warranty, the out of pocket expense from the dealership can be a little hard to handle. Luckily, ECS Tuning is here to help. After consulting with all of BMWs available information, the engineers at ECS Tuning have assembled a comprehensive kit to address all of the issues covered during Inspection II.

A common part failure on Mercedes-Benz 722.6xx automatic transmissions, the wiring harness spacer can begin to leak transmission fluid, eventually draining to the transmission control module and causing expensive damage. ECS Tuning offers a brand new Wiring Harness Spacer Kit, complete with new o-rings, dipstick tube cap lock pin and a quart of fluid to make installation a quick and easy process.

Little things mean a lot. Take this DTM Edition Shift kit. It has the unique look and unmistakable feel of genuine leather. Its basic black, stitched-seam boot is a welcome accent in any interior. The suede knob with chrome-on-black shift pattern falls comfortably in the palm of your hand to add pleasurable shifting to its understated good looks. Imported from European Audi by ECS Tuning; your source for exceptional Euro-accessories.

You won't believe the difference an LED lighting package makes on your car until you see it with your own eyes. LED illumination is a far brighter and friendlier light, crisp and clean, especially when compared to the dingy yellow glow from conventional filament style bulbs. Ziza lighting is proud to introduce LED license plate bulbs for your Volkswagen that will not cause a "bulb out" warning. These are direct replacement bulbs that install in minutes, there is no need to wire up fancy resistors or rework your factory wiring to get them functioning properly.

Rack 'em up with an original MINI roof rack base bar kit. This OEM original clamps directly to factory-installed roof railing on your MINI. Once installed, the rack accepts a range of accessories, both MINI-original and aftermarket, including RockyMounts. Order a complete OE base bar kit that includes keys and installation tools.

Built strong for a tough task. The Schwaben 24-piece wheel bearing replacement kit contains a heavy duty screw jack and assorted press caps and barrels that will handle most passenger car and light truck wheel bearing sizes. All parts are made of high quality steel, coated to prevent corrosion. This versatile, time-saving kit can be used for wheel bearings and various suspension bushings, allowing you to finish the job quickly and correctly without hassle.

To keep your ultimate driving machine in top shape, regular maintenance is imperative. BMW recommends the Inspection 2 at 40,000 miles and at each 40,000 miles thereafter. Doing all of the necessary inspections will keep your vehicle running much longer and cleaner. ECS Tuning is here to help with a selection of kits for any budget or maintenance need.

Built strong for a tough task. The Schwaben 24-piece wheel bearing replacement kit contains a heavy duty screw jack and assorted press caps and barrels that will handle most passenger car and light truck wheel bearing sizes. All parts are made of high quality steel, coated to prevent corrosion. This versatile, time-saving kit can be used for wheel bearings and various suspension bushings, allowing you to finish the job quickly and correctly without hassle.

To keep your ultimate driving machine in top shape, regular maintenance is imperative. BMW recommends the Inspection 2 at 40,000 miles and at each 40,000 miles thereafter. Doing the inspection procedure yourself will not only save a significant amount of time and money, but will add a level of confidence by seeing the parts replaced with your own eyes. The kit includes all filters - Oil Filter Kit, Air Filter, Fuel Filter, Cabin Filter/Fresh Air Filter - and 6 Spark Plugs, and OE Oil Drain Plug.

The DICE iPod integration kit lets you add the modern convenience of the iPod to your factory stereo system. This is a complete integration kit that includes everything needed to connect your iPod to your vehicles factory radio system easily, and retain all factory stereo characteristics. The interface creates a seamless interconnection between any apple iPod product and the entertainment system of the vehicle. The unit supports iPod text display for the ultimate convenience and style.

It is inevitable. Intake, exhaust, downpipe, valve cover, and in some applications valve seals will all be removed and replaced as you work on maintaining or improving your vehicle's engine. As you put everything back together, there are some things that should not be overlooked. A faulty gasket anywhere will always be bad news.

An obvious sign of a neglected or aging MINI is an exhaust tip that droops below the rear bumper. The problem is the result of worn exhaust clamp mounts or, more seriously, the rusted or broken clamp itself. Replacing the entire muffler clamp bracket system takes care of both issues, securing the exhaust tip squarely within the bumper for a factory-look fit.

To keep your ultimate driving machine in top shape, regular maintenance is imperative. BMW recommends the Inspection 2 at 40,000 miles and at each 40,000 miles thereafter. Doing all of the necessary inspections will keep your vehicle running much longer and cleaner. ECS Tuning is here to help with a selection of kits for any budget or maintenance need.

Brake your car, without breaking the bank. Improve braking performance with a sale-priced ECS Tuning Big Brake Kit. Bolt on larger rotors, standard finish or GEOMET slotted or slotted-and-drilled. Then mount your original calipers away from the spindle centerline with the kit's larger caliper frames for added mechanical leverage and shorter stops. No need to cough up extra bucks for a set of larger calipers, and you can go on buying readily available standard sized brake pads. Lower price. Less expense. Surer stops. Win. Win. Win.

To keep your driving machine in top shape, regular maintenance is imperative. BMW recommends the Inspection II at 40,000 miles & at each 40,000 miles thereafter. Doing all of the necessary inspections will keep your vehicle running much longer and cleaner. However, if you're out of warranty, the out of pocket expense from the dealership can be a little hard to handle. Luckily, ECS Tuning is here to help. After consulting with all of BMWs available information, the engineers at ECS Tuning have assembled a comprehensive kit to address all of the issues covered during Inspection II.

Mount up. Add an ECS Tuning dogbone mount stiffener and tighten the tranny-to-chassis connection. Reduce drivetrain movement--especially when your right foot is all the way down--with this high-durometer polyurethane insert, available in red or black. This complete kit installs easily to add muscle to your flabby OE pendulum mount. No need to remove the old mount; just insert the stiffener and fasten it to the chassis with the stretch bolt and large washer included in the kit.

To keep your driving machine in top shape, regular maintenance is imperative. BMW recommends the Inspection II at 40,000 miles & at each 40,000 miles thereafter. Doing all of the necessary inspections will keep your vehicle running much longer and cleaner. However, if you are out of warranty, the out of pocket expense from the dealership can be a little hard to handle. Luckily, ECS Tuning is here to help. After consulting with all of BMWs available information, the engineer at ECS Tuning have assembled a comprehensive kit to address all of the issues covered during Inspection II.

Built strong for a tough task. The Schwaben 24-piece wheel bearing replacement kit contains a heavy duty screw jack and assorted press caps and barrels that will handle most passenger car and light truck wheel bearing sizes. All parts are made of high quality steel, coated to prevent corrosion. This versatile, time-saving kit can be used for wheel bearings and various suspension bushings, allowing you to finish the job quickly and correctly without hassle.

A seriously tough tool for the discerning DIY'er. The Schwaben 24-piece wheel bearing replacement kit contains a heavy duty screw jack and assorted press caps and barrels that will handle most passenger car and light truck wheel bearing sizes. Wheel bearing replacement is made immeasurably more simple with a dedicated replacement kit. And with high quality corrosion-resistant coating, the tools will last through the most intense projects.

DIY with confidence. Don't pay shop labor rates for simple tasks like resetting your oil service & Inspection lights. PEAKE makes MINI scan tools perfect for vehicles with the OBD-2 port under the dash on the left hand side. Reset warning and reminder lights and retrieve onboard diagnostic data. Built with pride for over two decades, PEAKE scan tools have a well deserved reputation for quality and dependability, unique in the industry.

A common part failure on Mercedes-Benz 722.6xx automatic transmissions, the wiring harness spacer can begin to leak transmission fluid, eventually draining to the transmission control module and causing expensive damage. ECS Tuning offers a brand new Wiring Harness Spacer Kit, complete with new o-rings, dipstick tube cap lock pin and a quart of fluid to make installation a quick and easy process.

Things getting a little flabby south of the hood latch? Is mashing on the "go" pedal producing wheel hop or worrisome driveline vibration? If your factory mounts have thrown in the towel, don't waste your time installing more of the same. Move up to tough and durable mounts and bushings from ECS Tuning. Made of premium aluminum, plated steel, and potent polyurethane, our mounts and bushings are made for anyone who wants something more than parts designed for "average" drivers.

To keep your driving machine in top shape, regular maintenance is imperative. BMW recommends the Inspection II at 40,000 miles & at each 40,000 miles thereafter. Doing all of the necessary inspections will keep your vehicle running much longer and cleaner. However, if you are out of warranty, the out of pocket expense from the dealership can be a little hard to handle. Luckily, ECS Tuning is here to help. After consulting with all of BMWs available information, the engineer at ECS Tuning have assembled a comprehensive kit to address all of the issues covered during Inspection II.

By now, sun and the elements have undoubtedly taken their toll on your MINI's cowl covers. Once a dark matte black finish, they have probably faded to gray, requiring constant attention to keep them looking good. Both sides of this cowl cover are more than a styling statement; one has a built-in access panel to the brake fluid reservoir, and the other has an integrated battery cover.

Creak. Moan. Shimmy. Your control arms play a vital role in handling. Any worn-out or broken control arms will lead to ill handling, uneven tire wear and possible complete suspension failure. These replacement control arms will get you back on the right track. Includes bushings and ball joint. Alignment may be necessary after installation.