ECS News

Keep your cuts clean and your connections clamped tight with these new Schwaben tools. The CV boot clamp pliers will assist in maintaining the factory look by utilizing ear-type clamps found on CV axle boots, vacuum lines, and fuel lines right from the factory. The Schwaben mini tube cutter will cut hardlines with a smooth, straight finish making it easy to flare and fit. For the enthusiasts looking to complete a job, and leave it with the appearance that it was never touched.

Coming to a finish of an under-the-hood project is a sight that any enthusiast can enjoy. The other finish we enjoy the sight of is the paint finish, unblemished and grease free. The best way to ensure you maintain this appearance while working under the hood is with a fender cover. The ECS Magnetic fender cover features Soft magnets to hold tight in place, soft non-scratch leather on the front, and goose flannelette backing. Don't risk it, stay covered.

Grinding, rattling, or clicking when engaging your windows is a sign of probable regulator failure. The symptoms are usually the result of the cable rusting from humidity or a failed regulator motor. ECS now supplies ÜRO replacement regulators to restore your Audi's window operation to factory, giving your super-sedan a nice added measure of practicality and functionality. Please specify front or rear, left or right when purchasing - the product is door-specific.

You won't believe the difference an LED lighting package makes in your car until you see it with your own eyes. LED illumination is a far brighter and friendlier light, crisp and clean, especially when compared to the dingy yellow glow from conventional filament style bulbs. Now you can do a complete LED conversion using our MKVI Jetta LED Interior Lighting Kit. It contains all the LEDs needed for a total lighting upgrade. No need for guesswork or complicated ordering of individual bulbs.

The throttle body actuator is commonly prone to failure and each engine contains two, one for each cylinder head. Having this fixed by the dealership is very costly, so we offer the part at a better price and give you the option to let your trusted mechanic get the job done for you at lower cost and have you back on the road. *2 required per vehicle, one per bank, replaceable individually.

Why use wheel studs instead of wheel bolts? When removing and installing wheels that utilize the factory wheel bolts, excessive, unnecessary wear is placed on the wheel hub itself. This premature wear on an expensive component is costly and difficult to repair. Wheel studs also allow the use of varying length wheel spacers - a highly convenient feature for those that anticipate using different spacer size setups in the future. Both conical and ball seat lug nuts are available for a maximum of 10mm or 20mm wheel spacer use.

Tails you win. No matter which tail light treatment you choose, our assortment of stylish, easy-to install upgrades is sure to brighten your MKV GTI/Rabbit/R32. Choose from Euro-look, smoked, smoked cherry, or black lenses, some with stock bulbs, others with LEDs for a high-tech bright light that's sure to be noticed. No matter which set you choose, rest assured that these assemblies from VW/Audi and name brand aftermarket names like Hella, Jom, and Helix, will fit right and look great.

If your MINI’s brakes are starting too feel softer, or if stopping isn't as precise and powerful as it used to be, the problem may very well be your vacuum pump. This vacuum pump assists the power braking system in providing ample braking pressure. Located on the driver side of the cylinder head. ECS now offers a Vacuum Pump from Pierburg for your R55 N12-powered Cooper, remedying this performance-robbing braking issue and repairs a rattling or failed unit.

If your MINI’s brakes are starting too feel softer, or if stopping isn't as precise and powerful as it used to be, the problem may very well be your vacuum pump. This vacuum pump assists the power braking system in providing ample braking pressure. Located on the driver side of the cylinder head. ECS now offers a Vacuum Pump from Pierburg for your R57 N12-powered Cooper, remedying this performance-robbing braking issue and repairs a rattling or failed unit.

Magnaflow has been an industry leader in creating effective exhaust systems for decades. Their experience shows in each performance product release, and their Cat-Back Exhaust systems for the VW MKV R32 are some of the best examples yet. Made from 100% stainless steel, both both Sport and Touring Series systems have been dyno tested for proven power gains. All Magnaflow exhaust are mandrel bent and fully welded for trouble a free installation.

The throttle body actuator is commonly prone to failure and each engine contains two, one for each cylinder head. Having this fixed by the dealership is very costly, so we offer the part at a better price and give you the option to let your trusted mechanic get the job done for you at lower cost and have you back on the road. *2 required per vehicle, one per bank, replaceable individually.

ECS now offers the upgrade all E92/93 3 Series owners dream about at one point or another - M-Sport and M3 Replica Body Conversion Kits. Bring the track-bred exterior designs from the M3 to your E92/93 3 Series with M-Sport and M3 Replica Rear Bumpers, Front Bumpers, Front Fenders, and Side Skirts. Front bumpers include fog lamps and lower grilles, while rear bumpers include single or dual-exhaust rear diffusers. Made from flexible ABS plastic, fit and finish are exceptional, requiring only simple paint matching for factory-quality M Motorsports styling.

Replacing cooling system components and performing a proper coolant flush will ensure a long life for your cooling system. Most of the cooling system components are exposed to very high temperatures and repeated thermal cycling. Heat-hardening causes warping and cracking that leads to coolant loss and possible engine damage from overheating. Avoid headaches altogether and replace all problematic items at once to keep your cooling system running efficiently.

VWR parts, as developed by Volkswagen Racing UK for their competition racecars, have released a premium system for the MKVII GTI that subtly enhances the aesthetics and sound of your VW while reducing airflow restriction to increase power. Developed in Europe exclusively for the GTI, the VWR Racingline Exhaust System is a smart performance-enhancing upgrade. VWR RacingLine parts are specifically designed for VW with longevity and performance in mind.

To keep your ultimate driving machine in top shape, regular maintenance is imperative. BMW recommends the Inspection 2 at 40,000 miles and at each 40,000 miles thereafter. Doing the inspection procedure yourself will not only save a significant amount of time and money, but will add a level of confidence by seeing the parts replaced with your own eyes.

If you're planning on incorporating any vacuum-assisted accessories into your B7 A4 2.0T, you will need a reliable pressure reading from your engine. ECS engineers have again arrived at a simple, durable, and tasteful billet aluminum piece to suit your needs. The ECS Boost Tap clips in between your PCV hose and intake manifold, giving you up to two inlets for your creative use. The kit includes all hardware and a set screw for blocking off the unused inlet when only one vacuum port is required for a particular application

Small but mighty, the Neodymium super magnet in an ECS Tuning magnetic drain plug collects wandering metallic particles and holds them captive until they can be wiped away at the next oil change. Next oil change? Install an ounce of prevention with a drain plug that catches and holds ferrous particles with an iron grip, before they can cause expensive engine damage.

If your MINI’s brakes are starting too feel softer, or if stopping isn't as precise and powerful as it used to be, the problem may very well be your vacuum pump. This vacuum pump assists the power braking system in providing ample braking pressure. Located on the driver side of the cylinder head. ECS now offers a Vacuum Pump from Pierburg for your R56 N12-powered Cooper, remedying this performance-robbing braking issue and repairs a rattling or failed unit.

The oil cooler in your B6 A4 1.8T helps keep your oil temperature low, increasing the life of your oil and allowing your engine to run cooler and more smoothly. If you notice oil in your coolant, the solution can be as simple as replacing your oil cooling system. ECS offers a complete kit to take care of the entire system at once. The ECS-assembled kit includes an Oil Cooler unit, Gasket, Return and Supply hoses, and all new hardware for a complete system refresh.

The Exhaust Gas Recirculation valve on your Mercedes-Benz engine is a device which is used to help reduce nitrogen oxide (NOx ) emissions by recirculating a portion of the engines exhaust gas back into the intake manifold to be re-burned. ECS Tuning's EGR valve master kit offers everything you need to get your EGR system functioning properly again, and keep your engine running at its best for years to come.

If you spend time and money renewing your brake hardware and linings, you ought to consider upgrading to ECS Tuning Exact-Fit brake hoses, and do the job right. These premium brake hoses are stronger, more durable, and better protected than the originals. They are shielded in stainless steel mesh reinforcement, and coated with bright red vinyl for added protection. Available by the axle for front or rear, or as a complete vehicle set, our DOT-Compliant tailored hoses come with OE attachment fittings and sealing washers.

The Exhaust Gas Recirculation valve on your Mercedes-Benz engine is a device which is used to help reduce nitrogen oxide (NOx ) emissions by recirculating a portion of the engines exhaust gas back into the intake manifold to be re-burned. ECS Tuning's EGR valve master kit offers everything you need to get your EGR system functioning properly again, and keep your engine running at its best for years to come.

ECS now offers the upgrade all E91 3 Series owners dream about at one point or another - M3 Replica and M-Sport Body Conversion Kits. Bring the track-bred exterior designs from the M3 to your E91 3 Series with M-Sport Front Bumpers, Front Fenders, and Side Skirts. Front bumpers include fog lamps and lower grilles. Made from flexible ABS plastic, fit and finish are exceptional, requiring only simple paint matching for factory-quality M styling.

ECS now offers the upgrade all E90 3 Series owners dream about at one point or another - M-Sport or M3 Replica Body Conversion Kits. Bring the track-bred exterior designs from the M3 to your E90 3 Series with M-Sport and M3 Replica Rear Bumpers, Front Bumpers, Front Fenders, and Side Skirts. Front bumpers include fog lamps and lower grilles, while rear bumpers include single or dual-exhaust rear diffusers. Made from flexible ABS plastic, fit and finish are exceptional, requiring only simple paint matching for factory-quality M Motorsports styling.

You didn't buy a BMW because of the logo on the hood and trunk - though, admittedly, a brand-new clean BMW roundel does refresh your car's appearance like nothing else. ECS offers genuine OEM Trunk and Hood Roundel Emblems, complete with installation grommets for an easy snap-in installation. Replacement is made infinitely more easy using the clever ECS BMW Roundel Removal Tool, sliding underneath your worn emblem for leverage when pulling the old unit off of the hood or trunk.

Guesswork is expensive. It leads to costly repair errors that compromise vehicle safety. Talented DIY'er or repair professional, you need accurate vehicle data and specifications. That's why ECS is happy to offer an entire inventory of Bentley manuals, a reliable, respected source of repair data for your BMW E38. Books are carefully edited and illustrated for accuracy. A truly worthwhile investment.

A failed air injection pump is more than a noisy annoyance. Bad pumps store a fault code and turn on your check engine light, a sure way to fail your local emissions test. Dying pumps don't go quietly. As they fail, they make a loud buzzing noise, audible shortly after a cold engine start up; continuing for a minute or so after that. Our secondary air pump can put your air injection system back to normal, eliminate all that racket, and turn off that pesky dash light.

Check out the 710N diverter valve for your 2.7T A6. Keep your boost inside the intake - where it belongs. Cure common driveability concerns with this stronger, more durable 710N valve. Diverter valves live in a tough neighborhood. By definition, they limit turbo boost, and most eventually fail due to a pin-hole or tear in the valve diaphragm. The 710N Valve is a diaphragm-based, factory upgrade for a lot of applications. The 710N valve was originally found on the TT225, and is known to have a tougher internal diaphragm that can withstand higher boost levels

Let your S3 look great after hours with new LED lighting upgrades from Ziza. This complete interior lighting kit includes bulbs for the vanity lights, trunk lights, front dome lines, rear dome lights, and glove box lights. Install our complete interior lighting package and banish dirty yellow light from your interior, once and for all. These wedge- or festoon-style LEDs are as easy to install as standard bulbs. Their improved illumination and upscale look will be a welcoming addition to any interior.

When the time comes to do your regular maintenance, don’t get your supplies at a big box store that might not have exactly what your vehicle calls for. When changing your oil, it is imperative that you get quality parts and components. After all, oil is what keeps your engine lubricated and combats premature wear. These kits from ECS Tuning contain all that you will need to do your regular service on your vehicle. Quality, factory correct oil, filter, and drain plug will all work in harmony to keep those harmful contaminants from circulating through your engine.