ECS News

Before your next stop light liftoff, add a space age digital system monitor to your cockpit. P3Cars Vent Integrated Digital Interface is a plug-and-play data display that "fits like factory" into the left side dash vent, in easy view of the pilot seat. Pop it in and plug it into your car's onboard diagnostic connector. Then scroll through critical vehicle parameters and monitor manifold pressure, system temperatures, and other vital stats. No programming, cutting, or splicing. Just tons of fun.

By providing it all for you in a single click, ECS has made it easier than ever to get the quality replacement matching components you need when beginning a brake service. Our brake service kit includes rotors, pads, sensors, assembly grease, and even a full compliment of set screws to make your brake replacement easy. Everything you need to perform a professional quality brake service, you can find at ECS Tuning.

Pop the hood to show off gorgeous carbon fiber, not dull plastic. Each ECS Carbon Fiber Engine cover features a high gloss gel-coat finish on hand-laid carbon fiber and a reinforced fiberglass back. Designed by and produced exclusively for ECS Tuning, we can attest to the quality and fitment of these genuine carbon fiber covers. When you pop your hood, be sure what's underneath is worth looking at. ECS Carbon Fiber covers make it so, with acres of gorgeous carbon fiber.

The belly pans provided for modern Volkswagens have always appeared to be under-engineered, out of place, cost-cutting parts. Many enthusiasts have chosen to run their cars without this protective cover entirely. This decision, however, ignores the unfortunate reality that the belly pan protects several critical engine and drivetrain components. ECS has a much more sensible solution – The Street Shield Skid Plate features corrosion resistant, air-ventilated, 3/16” thick 5052 aluminum, with black zinc-coated steel hardware, offering complete engine undercarriage protection.

Are you tired of looking at your old, dirty power steering reservoir in your Mini, and want to replace it with some eye candy? Or is your power steering reservoir leaking expensive fluid all over the engine compartment? Forge has the perfect solution with this alloy power steering fluid tank, engineered to be a direct fit and made from machined and polished aluminum, you can forget about fluid leaks from this tank in the future.

Premium Exact-Fit lines from ECS Tuning, are made of special materials, unlike stock brake hoses made of synthetic rubber (EPDM) surrounded by fabric mesh reinforcement that is then encased in another layer of rubber. The core of an ECS Tuning Exact-Fit line on the other hand is made of extruded PTFE. Stronger than rubber, PTFE swells less under pressure, is flexible and durable, and is unaffected by chemicals that can damage EPDM hoses, including petroleum-based fluids. DOT Compliant Stainless Brake Lines.

Utilizing the latest advancements in materials science and manufacturing processes, Cool Carbon has arrived at formulation that provides the ultimate braking experience. Developed to withstand extreme temperatures exceeding 600°C while retaining smooth brake feel and longevity, Cool Carbon Front and Rear Brake Pads display the type of engineering rigor that fits your Porsche 996. The low noise and low dust formula reduces brake noise while keeping your wheels clean, adding a welcomed measure of practicality to these outstanding.

Stock diverter valves just can't handle performance upgrades. Add a little boost and they get all weak in the knees and blow the diaphragm to pieces. Forge knows this. That's why they've engineered boost-hardy diverter valves tough enough to take the pressure without blowing their lids.

Our ECS Tuning performance engine mounts are custom made in house by our leading R&D department. These mounts are the result of countless hours of research & testing to establish the best possible bushing design to minimize both engine vibration & driveline deflection, while maximizing strength. ECS Tunings primary goal was to achieve a comfortable & compliant ride while maximizing performance & we believe we've done just that. Featuring 6061-T6 Billet Aluminum anodized housings with tuned polyurethane isolators, DIY'ers will have no problem replacing the mounts themselves.

By providing it all for you in a single click, ECS has made it easier than ever to get the quality replacement matching components you need when beginning a brake service. Our brake service kit includes rotors, pads, sensors, assembly grease, and even a full compliment of set screws to make your brake replacement easy. Everything you need to perform a professional quality brake service, you can find at ECS Tuning.

Ready to blow off a little steam? Get Forge under your hood. Stock diverter valves just can't handle performance upgrades. Add a little boost and they get all weak in the knees and go to pieces. Forge knows this. That's why they've engineered boost-hardy blow-off valves tough enough to take the pressure without blowing their lids. Aluminum housing. Faster Response. Works and plays well with engine management systems.

Changing the suspension setup on a refined German car often times feels like meddling with perfection. With an advanced, highly wrought coilover system, you can be confident your addition is a reliable improvement. ST coilovers by KW are made of high grade, galvanized steel, and come with a 5 year limited warranty. With engineering tailored specifically to your BMW, preset damping and height adjustability provide the perfect balance between performance and ride comfort.

Dump your plastic clutch bleeder block for a metal-bodied upgrade and feel the difference. Unlike the factory installed plastic block, our all aluminum bleeder block is machined to exacting tolerances, then hard anodized for good looks and durability. Its rigid body doesn't flex or distort, for a leak-free connection. Wait. There's more. Unlike the original, our redesigned block has no internal fluid restriction. That means full fluid flow for faster pedal respsonse. Installation is ridiculously simple: we've put together a complete photo-tutorial. Check it out. Then order yours.

With most modern BMWs opting for run-flat tires or a road-side service package, there is a lack of spare tires. This is great if you plan on retaining the factory option but for those who would rather run a more comfortable tire versus the run flat – what happens when you get a flat? The answer? Simple! BMW offers a spare tire kit for those what to be prepared for the instance when you’re stuck with flat. Prepare your BMW for the future and have a spare tire handy for when that moment arises.

Ready to blow off a little steam? Get Forge under your hood. Stock diverter valves just can't handle performance upgrades. Add a little boost and they get all weak in the knees and go to pieces. Forge knows this. That's why they've engineered boost-hardy blow off valves tough enough to take the pressure without blowing their lids. With the aggressive blow-off sound, this will be music to your ears. Faster Response. Works and plays well with engine management systems.

Knock, knock. Who's there? If your MKIV suspension is knocking, trust us; it's no joke. When your control arm bushings start clangin' and bangin', they're warning you that they need to be replaced. Problem is, most of us don't have access to the equipment needed to install fresh bushings in old control arms. That's why we're offering control arm assemblies already fitted with polyurethane bushings that tighten suspension feel, restore vehicle safety, and last many miles longer than stock rubber bushings.

By providing it all for you in a single click, ECS has made it easier than ever to get the quality replacement matching components you need when beginning a brake service. Our performance brake service kits come with ECS 2-Piece Rotors and Hawk HPS pads. Everything you need to perform a professional quality brake service, you can find at ECS Tuning.

By providing it all for you in a single click, ECS has made it easier than ever to get the quality replacement matching components you need when beginning a brake service. Our brake service kit includes rotors, pads, sensors, assembly grease, and even a full compliment of set screws to make your brake replacement easy. Everything you need to perform a professional quality brake service, you can find at ECS Tuning.

Light on weight. Long on looks. ECS Tuning 2-Piece front and rear brake rotors combine the natural advantages of a cast iron braking surface with the weight savings and rapid heat dissipation of an aluminum hat. Cast iron-gray and durable matte black hats create an eye-catching contrast that accents painted calipers behind open-faced alloy wheels. These beauties have all the extras: black anodized hats, cross-drilled and slotted brake faces, and unlike OEM, directionally veined rotors for better cooling and heat dissipation over stock.

Our ECS Tuning performance engine mounts are custom made in house by our leading R&D department. These mounts are the result of countless hours of research & testing to establish the best possible bushing design to minimize both engine vibration & driveline deflection, while maximizing strength. ECS Tunings primary goal was to achieve a comfortable & compliant ride while maximizing performance & we believe we've done just that. Featuring 6061-T6 Billet Aluminum anodized housings with tuned polyurethane isolators, DIY'ers will have no problem replacing the mounts themselves.

By providing it all for you in a single click, ECS has made it easier than ever to get the quality replacement matching components you need when beginning a brake service. Our brake service kit includes rotors, pads, sensors, assembly grease, and even a full compliment of set screws to make your brake replacement easy. Everything you need to perform a professional quality brake service, you can find at ECS Tuning.

City Lights LEDs add a rich, expensive look to your C-Class. They work as good as they look! Specially designed LED circuits won't throw a "bulb out" alert like lesser lighting options. Installation is simple and straightforward. Plug 'em in and replace dingy OE light with an LED glow that turns heads.

By providing it all for you in a single click, ECS has made it easier than ever to get the quality replacement matching components you need when beginning a brake service. Our performance brake service kits come with ECS 2-Piece Rotors and Hawk HPS pads. Everything you need to perform a professional quality brake service, you can find at ECS Tuning.

Plastic coolant connections are consistently subjected to thermal cycling, and can weaken and become brittle with age. Considering the importance of adequate engine cooling, coolant fitting upgrades are always a wise investment. ECS has brought you a cast-aluminum replacement for the plastic coolant split pipe. This highly failure-prone fitting can be responsible for a sudden, major coolant leak – over-heating engine internals, causing catastrophic damage. The ECS coolant split pipe will withstand excessive abuse, restoring faith in your cooling system.

GEOMET® is a special coating containing metal oxides, zinc, and aluminum flakes, sprayed over the entire rotor surface to ensure complete coverage, and baked on at 600 degrees to form a durable and attractive silver-gray finish that fights rust far better than paints or other conventional coatings. Slotted or drilled and slotted, you can expect your new GEOMET® rotors to outperform and outlast stock rotors, and look great behind your alloy wheels.

GEOMET® is a special coating containing metal oxides, zinc, and aluminum flakes, sprayed over the entire rotor surface to ensure complete coverage, and baked on at 600 degrees to form a durable and attractive silver-gray finish that fights rust far better than paints or other conventional coatings. Slotted or drilled and slotted, you can expect your new GEOMET® rotors to outperform and outlast stock rotors, and look great behind your alloy wheels.

These headlights are designed to look like the later Gen 1 R52 MINI OEM HID Projector headlights but utilize H7 high and low beam bulbs. Feature plastic lenses with multiple choices and styles. They are plug and play. Add some Ziza H7 bulbs for multiple output colors. Features: • Manual adjustable leveling • E-code cutoffs on the projector LHD ( left hand drive ) • Multiple finishes to suit your MINI needs • OEM design and style *Does not contain headlight washers.

Who says lighting never strikes twice? New Ziza interior lighting kits add striking accents all over your interior, at glove box, footwells, vanity mirror, dome, trunk, and door light locations. The next time you hear thunder, think lighting, not lightning, and strike a blow for brighter, better looking interiors with Ziza LED kits.

By providing it all for you in a single click, ECS has made it easier than ever to get the quality replacement matching components you need when beginning a brake service. Our performance brake service kits come with ECS 2-Piece Rotors and Hawk HPS pads. Everything you need to perform a professional quality brake service, you can find at ECS Tuning.

Premium Exact-Fit lines from ECS Tuning, are made of special materials, unlike stock brake hoses made of synthetic rubber (EPDM) surrounded by fabric mesh reinforcement that is then encased in another layer of rubber. The core of an ECS Tuning Exact-Fit line on the other hand is made of extruded PTFE. Stronger than rubber, PTFE swells less under pressure, is flexible and durable, and is unaffected by chemicals that can damage EPDM hoses, including petroleum-based fluids. DOT Compliant Stainless Brake Lines.